Personal Computer World 2009 January

home *** CD-ROM | disk | FTP | other *** search

/ Personal Computer World 2009 January / PCWJAN09.iso / Software / Linux / NetBSD 4.0.1 / i386cd-4.0.1.iso / i386 / INSTALL.more < prev next >

Wrap

Text File | 2008-10-08 | 181KB | 3,457 lines

INSTALL(8) NetBSD System Manager's Manual INSTALL(8) NNAAMMEE IINNSSTTAALLLL -- Installation procedure for NetBSD/i386. CCOONNTTEENNTTSS About this Document............................................2 Quick install notes for the impatient..........................3 What is NetBSD?................................................3 Changes Between The NetBSD 4.0 release and 4.0.1 update........4 Security Advisories Fixes...................................4 Other Security Fixes........................................5 Networking..................................................5 Libraries...................................................5 Drivers.....................................................5 Miscellaneous...............................................5 Platforms specific..........................................6 Changes Between The NetBSD 3.0 and 4.0 Releases................6 Networking..................................................6 File systems................................................7 Drivers.....................................................7 Platforms..................................................10 Kernel subsystems..........................................10 Security...................................................11 Userland...................................................12 Components removed from NetBSD.............................13 The Future of NetBSD..........................................14 Sources of NetBSD.............................................14 NetBSD 4.0.1 Release Contents.................................14 NetBSD/i386 subdirectory structure.........................16 Binary distribution sets...................................17 NetBSD/i386 System Requirements and Supported Devices.........18 Supported devices..........................................18 Floppy controllers......................................18 MFM, ESDI, IDE, and RLL hard disk controllers...........18 SCSI host adapters......................................19 MDA, CGA, VGA, SVGA, and HGC Display Adapters...........20 Serial ports............................................20 Parallel ports..........................................20 Ethernet adapters.......................................20 FDDI adapters...........................................21 Token-Ring adapters.....................................21 Wireless network adapters...............................21 High Speed Serial.......................................22 Tape drives.............................................22 CD-ROM drives...........................................22 Mice....................................................22 Sound Cards.............................................22 Game Ports (Joysticks)..................................22 Miscellaneous...........................................22 PCMCIA Controllers......................................23 RAID Controllers........................................23 Specific driver footnotes:..............................23 Getting the NetBSD System on to Useful Media..................24 Preparing your System for NetBSD installation.................27 Installing the NetBSD System..................................28 Running the sysinst installation program...................28 Introduction............................................28 Possible hardware problems..............................28 General.................................................28 Quick install...........................................28 Booting NetBSD..........................................29 Network configuration...................................30 Installation drive selection and parameters.............30 Partitioning the disk...................................30 Preparing your hard disk................................32 Getting the distribution sets...........................32 Installation using ftp..................................32 Installation using NFS..................................33 Installation from CD-ROM................................33 Installation from a floppy set..........................33 Installation from an unmounted file system..............33 Installation from a local directory.....................33 Extracting the distribution sets........................33 Finalizing your installation............................34 Post installation steps.......................................34 Upgrading a previously-installed NetBSD System................37 Compatibility Issues With Previous NetBSD Releases............38 Issues affecting an upgrade from NetBSD 2.1 and older......38 Issues affecting an upgrade from NetBSD 3.x releases.......38 Issues with GDB 6.5...........................................39 Using online NetBSD documentation.............................39 Administrivia.................................................40 Thanks go to..................................................41 We are........................................................41 Legal Mumbo-Jumbo.............................................47 The End.......................................................53 DDEESSCCRRIIPPTTIIOONN AAbboouutt tthhiiss DDooccuummeenntt This document describes the installation procedure for NetBSD 4.0.1 on the _i_3_8_6 platform. It is available in four different formats titled _I_N_S_T_A_L_L_._e_x_t, where _._e_x_t is one of _._p_s, _._h_t_m_l, _._m_o_r_e, or _._t_x_t: _._p_s PostScript. _._h_t_m_l Standard Internet HTML. _._m_o_r_e The enhanced text format used on UNIX-like systems by the more(1) and less(1) pager utility programs. This is the format in which the on-line _m_a_n pages are generally pre- sented. _._t_x_t Plain old ASCII. You are reading the _m_o_r_e version. QQuuiicckk iinnssttaallll nnootteess ffoorr tthhee iimmppaattiieenntt This section contains some brief notes describing what you need to install NetBSD 4.0.1 on a machine of the i386 architecture. ++oo Fetch the appropriate pair of boot floppy images from the _i_3_8_6_/_i_n_s_t_a_l_l_a_t_i_o_n_/_f_l_o_p_p_y_/ directory, or a CD-ROM image (the images from _i_3_8_6_/_i_n_s_t_a_l_l_a_t_i_o_n_/_c_d_r_o_m_/ are bootable, but do not contain binary sets - these are intended for network installs, or when different bootblocks are needed). Most people will need the _b_o_o_t_1_._f_s and _b_o_o_t_2_._f_s or _b_o_o_t_._i_s_o images for VGA console installation, or the _b_o_o_t_-_c_o_m_1_._f_s and _b_o_o_t_-_c_o_m_2_._f_s or _b_o_o_t_-_c_o_m_._i_s_o images for installation via serial console. You may also possibly (but not necessarily) want to use _b_o_o_t_l_a_p_1_._f_s and _b_o_o_t_l_a_p_2_._f_s if installing on a laptop. The INSTALL_LAPTOP kernel can be loaded from one of the cdrom images via the bootloader: bboooott _n_b_l_a_p_t_o_p. The default kernel on ISO images have ACPI enabled. This is known to cause issues on a few older machines which have buggy ACPI tables. To boot with ACPI disabled, interrupt the NetBSD boot loader, and enter: bboooott --cc. At the userconf prompt, enter: ddiissaabbllee aaccppii followed by: qquuiitt. The kernel from the two floppy set is also present on the ISO images and can be loaded using: bboooott _n_b_n_o_a_c_p_i. ++oo The actual binary distribution is in the _i_3_8_6_/_b_i_n_a_r_y_/_s_e_t_s_/ directory. When you boot the install floppies, the installation program can fetch these files for you (using e.g. ftp), if you have a network connection. There are several other methods to get the binary sets onto your machine. You will at a minimum need one of the kernel sets, typically _k_e_r_n_-_G_E_N_E_R_I_C_._t_g_z, as well as _b_a_s_e_._t_g_z and _e_t_c_._t_g_z. In a typical workstation installation you will probably want all the installation sets. ++oo Write the floppy images directly to a pair of floppies. If you have problems writing a raw image to a floppy, the rraawwrriittee..eexxee MS-DOS pro- gram or the RRaawwrriittee3322..eexxee Windows32 program (inside _r_a_w_r_i_t_e_3_2_._z_i_p) in the _i_3_8_6_/_i_n_s_t_a_l_l_a_t_i_o_n_/_m_i_s_c_/ directory may be of help. The disk(s) you just prepared will be used to boot the installation kernel, which contains all the tools required to install NetBSD. ++oo For third-party programs which are not part of the base NetBSD dis- tribution, you will want to explore the ppkkggssrrcc system with its more than 7200 program packages. WWhhaatt iiss NNeettBBSSDD?? The NetBSD Operating System is a fully functional Open Source UNIX-like operating system derived from the University of California, Berkeley Net- working Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources. NetBSD runs on fifty four different system architectures (ports), featuring sev- enteen machine architectures across fifteen distinct CPU families, and is being ported to more. The NetBSD 4.0.1 release contains complete binary releases for many different system architectures. (A few ports are not fully supported at this time and are thus not part of the binary distri- bution. Please see the NetBSD web site at hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg// for information on them.) NetBSD is a completely integrated system. In addition to its highly por- table, high performance kernel, NetBSD features a complete set of user utilities, compilers for several languages, the X Window System, firewall software and numerous other tools, all accompanied by full source code. NetBSD is a creation of the members of the Internet community. Without the unique cooperation and coordination the net makes possible, it's likely that NetBSD wouldn't exist. CChhaannggeess BBeettwweeeenn TThhee NNeettBBSSDD 44..00 rreelleeaassee aanndd 44..00..11 uuppddaattee The NetBSD 4.0.1 update is the first security/critical update of the NetBSD 4.0 release branch. This represents a selected subset of fixes deemed critical in nature for stability or security reasons. These fixes will also appear in future releases (NetBSD 4.1), together with other less-critical fixes and feature enhancements. The complete list of changes can be found in the CHANGES-4.0.1: ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//NNeettBBSSDD//NNeettBBSSDD--44..00..11//CCHHAANNGGEESS--44..00..11 file in the top level directory of the NetBSD 4.0.1 release tree. _S_e_c_u_r_i_t_y _A_d_v_i_s_o_r_i_e_s _F_i_x_e_s ++oo NetBSD-SA2008-004, bzip2(1) Multiple issues (CVE-2008-1372 and CVE-2005-0953), has been fixed by upgrading bzip2 to 1.0.5. ++oo NetBSD-SA2008-005, OpenSSH Multiple issues (CVE-2008-1483 and CVE-2008-1657), has been fixed by applying patches from upstream. ++oo NetBSD-SA2008-006, Integer overflow in strfmon(3) function (CVE-2008-1391), has been fixed. ++oo NetBSD-SA2008-008, OpenSSL Montgomery multiplication (CVE-2007-3108), has been fixed. ++oo NetBSD-SA2008-009, BIND cache poisoning (CVE-2008-1447 and CERT VU#800113), has been fixed by updating BIND to 9.4.2-P2. Note there are two related changes to this advisory: -- The default behavior of ipfilter's Port Address Translation has been changed to using random port allocation rather than sequen- tial mappings, to avoid decreasing the randomness of source ports used for DNS queries which affects the BIND cache poisoning prob- lem. -- A `query-source' statement, which could allow the BIND cache poi- soning attack, has been commented out in the default named.conf(5) file. ++oo NetBSD-SA2008-010, Malicious PPPoE discovery packet can overrun a kernel buffer (CVE-2008-3584), has been fixed. ++oo NetBSD-SA2008-011, ICMPv6 MLD query (CVE-2008-2464), has been fixed. ++oo NetBSD-SA2008-012, Denial of Service issues in racoon(8) (CVE-2008-3652), has been fixed by upgrading ipsec-tools to release 0.7.1. Note this also fixes CVE-2008-3651. ++oo upcoming NetBSD-SA2008-013, IPv6 Neighbor Discovery Protocol routing vulnerability (CVE-2008-2476), has been fixed. ++oo upcoming NetBSD-SA2008-014, Remote cross-site request forgery attack issue in ftpd(8) (CVE-2008-4247), has been fixed. ++oo upcoming NetBSD-SA2008-015, Remote kernel panics on IPv6 connections (CVE-2008-3530), has been fixed. _N_o_t_e_: NetBSD-SA2008-007 and advisories prior to NetBSD-SA2008-004 don't affect NetBSD 4.0. _O_t_h_e_r _S_e_c_u_r_i_t_y _F_i_x_e_s ++oo Fix a buffer overrun which could crash a FAST_IPSEC kernel. ++oo tcpdump(8): Fix CVE-2007-1218, CVE-2007-3798 and CAN-2005-1278 in base-tcpdump. ++oo Fix a buffer overflow of PCF font parser in X11 libXfont library (CVE-2008-0006). ++oo Fix a buffer overflow of Tektronix Hex Format support in binutils (CVE-2006-2362). ++oo machfb(4), voodoofb(4): Introduce two missing KAUTH_GENERIC_ISSUSER check in the mmap(2) code. _N_e_t_w_o_r_k_i_n_g ++oo Update root.cache to 2008020400 version. ++oo Fix IP packet forwording code to make sure to send a reasonable frag- ment size when IPSEC is configured. ++oo Fix a bug in TCP SACK code which causes data corruption. ++oo Fix an rc.d(8) script for amd(8) not to shutdown gracefully since it seems to cause problems for more people than the old (also broken) behavior. ++oo ftpd(8): Fix and reorganize PAM support. _L_i_b_r_a_r_i_e_s ++oo Pthread support of BIND has been disabled for future binary compati- bility after removal of the scheduler activations. ++oo Fix coredump of gdtoa (conversion between binary floating-point and ASCII string) functions on out of memory conditions. _D_r_i_v_e_r_s ++oo fxp(4): Fix random pool corruption and hangup problems. ++oo wd(4): Handle more LBA48 bug quirks on some Hitachi's SATA/IDE drives. _M_i_s_c_e_l_l_a_n_e_o_u_s ++oo Disable a NULL pointer check in zlib for standalone programs. This fixes errors on loading a gzipped kernel (including installation ker- nels) on several ports (news68k etc.) whose kernels are loaded at address zero. ++oo awk(1): Bring back an accidentally removed fix to allow escape of a newline in string literals. ++oo gcc(1): -- Fix compilation of native sh3 gcc on 64-bit build machines. -- Fix an internal compiler error on compiling m68k softfloat or m68010 targets on 64-bit build machines. ++oo zgrep(1): Make `--hh' option (suppress filenames on output when multiple files are searched) actually work. ++oo Fix parallel build failure on building hpcarm, hpcmips and hpcsh releases. _P_l_a_t_f_o_r_m_s _s_p_e_c_i_f_i_c ++oo acorn32: Fix a bootloader problem on some RiscPCs. ++oo cobalt: -- Add a workaround to avoid panic on probing a multi function PCI device on Qube's PCI slot. -- Fix a bug in the interrupt handler which causes network freeze if more than one interfaces are used. ++oo hp700: Fix potential kernel / userland memory corruption in copyinstr(9) and copyoutstr(9). ++oo sparc64: Fix a bug in _l_o_c_o_r_e_._s which causes unexpected behavior. ++oo sun3: Fix a bug which might cause an occasional panic during boot. ++oo vax: Make syscall handler use proper copyin(9) function on parsing syscall args. CChhaannggeess BBeettwweeeenn TThhee NNeettBBSSDD 33..00 aanndd 44..00 RReelleeaasseess The NetBSD 4.0 release provides numerous significant functional enhance- ments, including support for many new devices, integration of hundreds of bug fixes, new and updated kernel subsystems, and many user-land enhance- ments. The result of these improvements is a stable operating system fit for production use that rivals most commercially available systems. It is impossible to completely summarize more than a year of development that went into the NetBSD 4.0 release. The complete list of changes can be found in the CHANGES: ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//NNeettBBSSDD//NNeettBBSSDD--44..00//CCHHAANNGGEESS and CHANGES-4.0: ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//NNeettBBSSDD//NNeettBBSSDD--44..00//CCHHAANNGGEESS--44..00 files in the top level directory of the NetBSD 4.0 release tree. Some highlights include: _N_e_t_w_o_r_k_i_n_g ++oo agr(4): new pseudo-device driver for link level aggregation. ++oo IPv6 support was extended with an RFC 3542-compliant API and added for gre(4) tunnels and the tun(4) device. ++oo A NDIS-wrapper was added to use Windows binary drivers on the i386 platform, see ndiscvt(8). ++oo The IPv4 source-address selection policy can be set from a number of algorithms. See "IPSRCSEL" in options(4) and in_getifa(9). ++oo Imported wpa_supplicant(8) and wpa_cli(8). Utilities to connect and handle aspects of 802.11 WPA networks. ++oo Imported hostapd(8). An authenticator for IEEE 802.11 networks. ++oo carp(4): imported Common Address Redundancy Protocol to allow multi- ple hosts to share a set of IP addresses for high availability / redundancy, from OpenBSD. ++oo ALTQ support for the PF packet filter. ++oo etherip(4): new EtherIP tunneling device. It's able to tunnel Ether- net traffic over IPv4 and IPv6 using the EtherIP protocol specified in RFC 3378. ++oo ftpd(8) can now run in standalone mode, instead of from inetd(8). ++oo tftp(1) now has support for multicast TFTP operation in open-loop mode, server is in progress. ++oo tcp(4): added support for RFC 3465 Appropriate Byte Counting (ABC) and Explicit Congestion Notification as defined in RFC 3168. _F_i_l_e _s_y_s_t_e_m_s ++oo scan_ffs(8), scan_lfs(8): utilities to find FFSv1/v2 and LFS parti- tions to recover lost disklabels on disks and image files. ++oo tmpfs: added a new memory-based file system aimed at replacing mfs. Contrary to mfs, it is not based on a disk file system, so it is more efficient both in overall memory consumption and speed. See mount_tmpfs(8). ++oo Added UDF support for optical media and block devices, see mount_udf(8). Read-only for now. ++oo NFS export list handling was changed to be filesystem independent. ++oo LFS: lots of stability improvements and new cleaner daemon. It is now also possible to use LFS as root filesystem. ++oo vnd(4): the vnode disk driver can be used on filesystems such as smbfs and tmpfs. ++oo Support for System V Boot File System was added, see newfs_sysvbfs(8) and mount_sysvbfs(8). _D_r_i_v_e_r_s ++oo Audio: -- Support for new models on drivers such as Intel ICH8/6300ESB, NVIDIA nForce 3/4, etc. -- Added support for AC'97 modems. -- auich(4): added support to handle the AC'97 modem as audio device, enabled with the kernel option ``AUICH_ATTACH_MODEM'' -- azalia(4): added support for S/PDIF. ++oo Hardware Monitors: -- amdpm(4): added support for the i2c bus on the AMD-8111 used on many Opteron motherboards and for the Analog Devices ADT7464 hardware monitor chip. -- adt7467c(4): new driver for Analog Devices ADT7467 and ADM1030 hardware monitor chips. -- ipmi(4): new driver for motherboards implementing the Intelligent Platform Management Interface 1.5 or 2.0, from OpenBSD. -- it(4): new driver for iTE 8705F/8712F and SiS 950 hardware moni- tors. -- The lm(4) driver was rewritten and support for more chips was added, for example for Winbond W83627HF, W83627THF, W83627DHG and Asus AS99127F. -- owtemp(4): new driver for the 1-Wire temperature sensors. -- tmp121temp(4): new driver for the Texas Instruments TMP121 tem- perature sensor. -- ug(4): new driver for Abit uGuru hardware monitor found on newer Abit motherboards. ++oo Miscellaneous: -- geodewdog(4): new AMD Geode SC1100 Watchdog Timer driver. -- gscpcib(4): new AMD Geode SC1100 PCI-ISA bridge that provides support for the GPIO interface. ++oo Networking: -- ath(4): updated HALs with support for WiSOC (AR531x) and 32bit SPARC. -- bge(4): added support for the following chips: BCM5753, BCM5753M, BCM5715, BCM5754, BCM5755 and BCM5787. Numerous improvements and bugfixes were made too. -- kse(4): new driver for Micrel KSZ8842/8841 PCI network cards. -- msk(4): new driver for Marvell Yukon 2 GigE PCI network cards, from OpenBSD. -- nfe(4): new driver for NVIDIA nForce Ethernet network cards, from OpenBSD. -- ral(4): new 802.11 driver for PCI/Cardbus Ralink RT2500, RT2501, RT2600, RT2661 and RT2500 USB chipsets, from OpenBSD. -- rum(4): new 802.11 driver for USB Ralink RT2501 and RT2601 chipsets, from OpenBSD. -- sip(4): now works on sparc64. -- tlp(4): added support for ASIX AX88140A and AX88141. -- vr(4): added support for the VIA Rhine III. -- wm(4): added support for i8003, ICH8, ICH9 and others. Support for IPv6 Rx TCP/UDP Checksum Offloading and more. -- wpi(4): new driver for Intel PRO/Wireless 3945ABG PCI 802.11 net- work cards, from OpenBSD. ++oo Security: -- glxsb(4): new driver for the AMD Geode LX AES Security Block that provides random numbers and AES acceleration, from OpenBSD. ++oo Power Management: -- Support for Intel Speedstep SMI on PIIX4 PCI-ISA for i386. -- Support for AMD PowerNow and Cool'n'Quiet Technology on K7 and K8 CPUs (both in 32 and 64 bit mode), including Athlon Mobile, Athlon64, Opteron or X2. See options(4) for more information. -- Support for more Enhanced Speedstep CPUs, including VIA C7/Eden and Intel Core Solo/Duo/Duo2. See options(4) for more informa- tion. -- The Enhanced Speedstep and PowerNow drivers were modified to be able to be scaled in all CPUs available, saving power on SMP sys- tems. ++oo Storage: -- ahcisata(4): new driver for AHCI 1.0 and 1.1 compliant SATA con- trollers. -- ataraid(4): added support to handle Adaptec HostRAID and VIA V- Tech software RAID. -- ciss(4): new driver for HP/Compaq 5th+ generation Smart ARRAY controllers, from OpenBSD. -- fdc(4): added support for SBus based sparc64 machines and fixed formatting on sparc. -- gcscide(4): new driver for the AMD Geode CS5535 Companion Device IDE controller. -- jmide(4): new driver for JMicron Technology JMB36x PCIe to SATA II/PATA controllers. -- mfi(4): new driver for LSI Logic and Dell MegaRAID SAS con- trollers, from OpenBSD. -- mpt(4): added support for newer SAS and similar devices. -- njata(4): new driver for Workbit NinjaATA-32 CardBus IDE con- troller. -- pdcsata(4): added support for the Promise PDC20775, PDC20771, PDC40518, PDC40718 and some bugfixes. -- piixide(4): added support for some ICH8/ICH8-M/ICH9 IDE and SATA controllers. -- svwsata(4): new driver for Serverworks K2 SATA controllers, from OpenBSD. -- viaide(4) added support for the VIA VT8237A SATA controller and AMD CS5536 Companion Device IDE Controller. ++oo USB: -- ucycom(4): new driver for Cypress microcontroller based serial devices. -- uipaq(4): new driver for the iPAQ devices. -- uslsa(4): new driver for Silicon Labs CP210x series serial adapters. -- utoppy(4): new driver for the Topfield TF5000PVR range of digital video recorders. _P_l_a_t_f_o_r_m_s ++oo i386: -- Added support for the for Multiboot specification. This means much improved support for loading the kernel by GRUB, including passing in parameters to the kernel. -- Added the unichromefb framebuffer driver that supports the VIA Unichrome Graphics adapter. -- vesafb(4): added new framebuffer driver that supports VESA BIOS (VBE) 2.0 extensions and up. -- Added cd9660 file system support to the BIOS bootloader. ++oo evbarm: new platform support for Arcom Viper PXA255-based single board, Atmark Techno Armadillo-9 and Armadillo-210, Certance CP-3100, Linksys NSLU2 (a.k.a. "Slug") and I-O DATA HDL-G Giga LANDISK NAS devices. ++oo evbmips: added support for Alchemy Au1550 processors, DBAu1550 boards, Alchemy Au15XX PCI host, (OMS-AL400/128) and Atheros AR5312 SoC. ++oo New port ews4800mips: NEC's MIPS based EWS4800 workstations. ++oo cobalt: added support for booting off raidframe RAID1 mirrors. ++oo hpcmips: added the teliosio(4) driver for the Sharp Telios LCD screen and Battery unit. ++oo New port landisk: port to the SH4 processor based NAS appliances, supporting models by I-O DATA (USL-5P, HDL-U, HDL-AV, HDL-W and HDLM- U series, SuperTank LAN Tank, UHDL-160U and UHDL-300U) and Plextor PX-EH16L, PX-EH25L and PX-EH40L. ++oo macppc: this port has gained support to use accelerated wsdisplay drivers by default (if possible), and uses the appropriate driver rather than the Generic Open Firmware Framebuffer. ++oo prep: this port has been modernized, and support for five additional machines has been added, among them the IBM 7024-E20 and 7025-F30 models and Motorola Powerstack E1. Additionally, sysinst support was added, and the bootloader process was improved, allowing easy instal- lation and upgrade to future releases. ++oo sparc: added support for booting off raidframe RAID1 mirrors. ++oo Xen: support for Xen3 domU and dom0 (Unprivileged domain and domain 0), including support for hardware virtualization on CPUs that sup- port it. _K_e_r_n_e_l _s_u_b_s_y_s_t_e_m_s ++oo Improved Firewire (IEEE1394) support imported from FreeBSD. ++oo The midi(4) framework got a complete overhaul for better support of Active Sensing and improved handling of tempo and timebase changes. ++oo Added a Bluetooth protocol stack including: -- hardware drivers: ubt(4) for USB controllers, and bt3c(4) for the 3Com Bluetooth PC-Card. -- socket based access to the HCI, L2CAP, RFCOMM and SCO protocols. -- pseudo drivers for integrating services on remote Bluetooth devices such as Keyboards, Mice and SCO Audio into the NetBSD device framework. See bluetooth(4), bthset(1) and btpin(1). ++oo Imported the bio(4) framework from OpenBSD, to query/control block hardware RAID device controllers. Currently supporting the mfi(4) driver. ++oo Kernel uses stateful read-ahead algorithm. ++oo dkctl(8) can be used to switch buffer queuing strategies on the fly on wd(4) disks, see also bufq(9). ++oo fileassoc(9) is used by Veriexec, it adds in-kernel and file-system independent file meta-data association interface. ++oo firmload(9): an API for loading firmware images used by various hard- ware devices. ++oo gpio(4): imported General Purpose I/O framework from OpenBSD. ++oo onewire(4): imported Dallas Semiconductor 1-wire bus framework from OpenBSD. ++oo The proplib(3) protocol was added for sending property lists to/from the kernel using ioctls. ++oo spi(4): new SPI (Serial Peripherial Interface) framework. ++oo timecounter(9) adds a new time-keeping infrastructure along with NTP API 4 nanokernel implementation. Almost all platforms were changed to support this API. ++oo Start of 32bit-Linux-emulation for amd64 (COMPAT_LINUX32). ++oo wscons(4) console driver supports splash screens, scrolling, progress bar for kernel and boot messages. Kernel interfaces have continued to be refined, and more subsystems and device drivers are shared among the different ports. You can look for this trend to continue. _S_e_c_u_r_i_t_y ++oo The FAST_IPSEC IPsec implementation was extended to use hardware acceleration for IPv6, in addition to the hardware accelerated IPv4 that was available before. See fast_ipsec(4) for more information. ++oo mprotect(2) got restrictions to enforce W^X policies, from PaX. See options(4), sysctl(3), and paxctl(1). ++oo GCC 4's support for stack smashing protection (SSP) was enabled by adding libssp, see security(8). ++oo The kernel authorization framework kauth(9) was added, replacing the traditional BSD credential management and privileged operation access control with an abstract layer, allowing the implementation of vari- ous security models either as part of the NetBSD distribution or as third-party LKMs. NetBSD's kernel authorization is a hybrid clean-room implementation of a similar interface developed by Apple, extending its capabilities and combining concepts of credential inheritance control. _U_s_e_r_l_a_n_d ++oo 3rd party software updates: -- BIND 9.4.1-P1 -- OpenSSL 0.9.8e -- CVS 1.11.22 -- OpenSSH 4.4 -- gettext 0.14.4 -- PF from OpenBSD 3.7 -- (n)awk 20050424 -- Postfix 2.4.5 -- am-utils 6.1.3 -- file 4.21 -- zlib 1.2.3 -- GNU binutils 2.16.1 -- GNU groff 1.19.2 -- IPFilter 4.1.23 -- GNU gcc 4.1.2 prerelease -- GNU gdb 6.5 (some architectures) -- NTP 4.2.4p2 -- pppd 2.4.4 ++oo cdplay(1): added digital transfer mode support. ++oo cksum(1) can now verify checksums. ++oo csplit(1): new utility that splits a file into pieces. From FreeBSD/OpenBSD. ++oo identd(1): added support for forwarding ident queries and receiving of proxied ident queries. ++oo getent(1): added support for the ethers database. ++oo gkermit(1): new program for transferring files using the Kermit pro- tocol. ++oo mail(1): added support for Mime and multi-character set handling, command line editing and completion. ++oo utoppya(1): new utility to interface to the utoppy(4) driver. ++oo init(8): added support for running multi-user in a chroot() environ- ment. Allows / file system on e.g., cgd(4), vnd(4) or ccd(4) volumes. ++oo gpt(8): new GUID partition table maintenance utility, from FreeBSD. ++oo iSCSI target (server) code added, see iscsi-target(8); Initiator (client) code is underway. ++oo lockstat(8): new command to display a summary of kernel locking events recorded over the lifetime of a called program. ++oo ofctl(8): new command to display the OpenPROM or OpenFirmware device tree for the macppc, shark and sparc64. ++oo Various utilities to support Bluetooth were added: -- btconfig(8) for controller configuration. -- btdevctl(8) to manage pseudo devices relating to remote services. -- bthcid(8) and btpin(1) for authenticating radio connections. -- sdpd(8) for providing service discovery to remote devices. -- sdpquery(1) for querying services on remote devices. -- rfcomm_sppd(1) to access remote services over RFCOMM via stdio or pty. -- bthset(1) for making connections to Bluetooth headsets. Besides this list, there have also been innumerable bug fixes and other miscellaneous enhancements of course. _C_o_m_p_o_n_e_n_t_s _r_e_m_o_v_e_d _f_r_o_m _N_e_t_B_S_D In this release of NetBSD, some software components known from previous releases were removed from the system. In some cases those were compo- nents that are not useful anymore or their utility does not justify main- tenance overhead. Other components were not working properly and there was lack of interest in fixing them. ++oo Sushi was removed from the base system due to lack of interest and maintenance. If you really want it, it is available in the CVS repos- itory at othersrc/usr.sbin/sushi. However, be warned that it is unmaintained and is most likely out of date. ++oo Vinum was removed due to lack of interest and maintenance. At the time of removal, it had several known serious issues (including not being compilable). RAIDframe provides similar functionality. If you were using Vinum you will need to back up your data, delete the Vinum partitions, create RAIDframe partitions, and restore your data to them. Details about RAIDframe can be found in raid(4), raidctl(8), and the NetBSD Guide: hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddooccss//gguuiiddee//eenn//cchhaapp--rrff..hhttmmll. ++oo Sendmail was removed. Postfix is the MTA and provides the sendmail(1) command line tool. Postfix has been included with NetBSD since NetBSD 1.5 was released in December 2005. Details about Postfix can be found in the NetBSD Guide: hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddooccss//gguuiiddee//eenn//cchhaapp--mmaaiill..hhttmmll. For those who need Sendmail, it is available from pkgsrc in the _m_a_i_l_/_s_e_n_d_m_a_i_l and _m_a_i_l_/_s_e_n_d_m_a_i_l_8_1_3 packages. ++oo NETCCITT and NETNS were removed due to lack of interest and mainte- nance. They had known serious issues (including being out of date with respect to other network code) and there were no known users at the time of their removal. Unfortunately, there is no replacement or option for them. ++oo UUCP was removed. The NetBSD improvements were merged into the pkgsrc version. For those who use UUCP tools, they are available from pkgsrc in the _n_e_t_/_u_u_c_p package. The cu(1) command is available as a frontend to tip(1). ++oo The Fortran 77 compiler ( g77 ) has been removed with the transition from GCC 3 to GCC 4, which does not include it. For those who need it, it is available from pkgsrc in the _l_a_n_g_/_g_c_c_3_-_f_7_7 package. ++oo The evbsh5 port has been removed from NetBSD due to lack of interest, compounded by a lack of available SH5 hardware. TThhee FFuuttuurree ooff NNeettBBSSDD The NetBSD Foundation has been incorporated as a non-profit organization. Its purpose is to encourage, foster and promote the free exchange of com- puter software, namely the NetBSD Operating System. The foundation will allow for many things to be handled more smoothly than could be done with our previous informal organization. In particular, it provides the framework to deal with other parties that wish to become involved in the NetBSD Project. The NetBSD Foundation will help improve the quality of NetBSD by: ++oo providing better organization to keep track of development efforts, including co-ordination with groups working in related fields. ++oo providing a framework to receive donations of goods and services and to own the resources necessary to run the NetBSD Project. ++oo providing a better position from which to undertake promotional activities. ++oo periodically organizing workshops for developers and other interested people to discuss ongoing work. We hope to support even _m_o_r_e hardware in the future, and we have a rather large number of other ideas about what can be done to improve NetBSD. We intend to continue our current practice of making the NetBSD-current development source available on a daily basis. We intend to integrate free, positive changes from whatever sources sub- mit them, providing that they are well thought-out and increase the usability of the system. Above all, we hope to create a stable and accessible system, and to be responsive to the needs and desires of NetBSD users, because it is for and because of them that NetBSD exists. SSoouurrcceess ooff NNeettBBSSDD Refer to hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//mmiirrrroorrss//.. NNeettBBSSDD 44..00..11 RReelleeaassee CCoonntteennttss The root directory of the NetBSD 4.0.1 release is organized as follows: _._._._/_N_e_t_B_S_D_-_4_._0_._1_/ CHANGES Changes between NetBSD 3.0 and branching 4.0. CHANGES-4.0 Changes since NetBSD 4.0 was branched. CHANGES-4.0.1 Changes between NetBSD 4.0 and 4.0.1. CHANGES.prev Changes in earlier NetBSD releases. LAST_MINUTE Last minute changes. MIRRORS A list of sites that mirror the NetBSD 4.0.1 distribution. README.files README describing the distribution's contents. TODO NetBSD's todo list (also somewhat incomplete and out of date). _p_a_t_c_h_e_s_/ Post-release source code patches. _s_o_u_r_c_e_/ Source distribution sets; see below. In addition to the files and directories listed above, there is one directory per architecture, for each of the architectures for which NetBSD 4.0.1 has a binary distribution. The source distribution sets can be found in subdirectories of the _s_o_u_r_c_e subdirectory of the distribution tree. They contain the complete sources to the system. The source distribution sets are as follows: ggnnuussrrcc This set contains the ``gnu'' sources, including the source for the compiler, assembler, groff, and the other GNU utilities in the binary distribution sets. _9_5 _M_B _g_z_i_p_p_e_d_, _4_8_4 _M_B _u_n_c_o_m_p_r_e_s_s_e_d sshhaarreessrrcc This set contains the ``share'' sources, which include the sources for the man pages not associated with any particular program; the sources for the typesettable document set; the dictionaries; and more. _6 _M_B _g_z_i_p_p_e_d_, _2_5 _M_B _u_n_c_o_m_p_r_e_s_s_e_d ssrrcc This set contains all of the base NetBSD 4.0.1 sources which are not in ggnnuussrrcc, sshhaarreessrrcc, or ssyyssssrrcc. _4_5 _M_B _g_z_i_p_p_e_d_, _2_1_4 _M_B _u_n_c_o_m_p_r_e_s_s_e_d ssyyssssrrcc This set contains the sources to the NetBSD 4.0.1 kernel for all architectures; config(1); and dbsym(8). _3_3 _M_B _g_z_i_p_p_e_d_, _1_6_5 _M_B _u_n_c_o_m_p_r_e_s_s_e_d xxssrrcc This set contains the sources to the X Window System. _9_5 _M_B _g_z_i_p_p_e_d_, _5_0_2 _M_B _u_n_c_o_m_p_r_e_s_s_e_d All the above source sets are located in the _s_o_u_r_c_e_/_s_e_t_s subdirectory of the distribution tree. The source sets are distributed as compressed tar files. Except for the ppkkggssrrcc set, which is traditionally unpacked into _/_u_s_r_/_p_k_g_s_r_c, all sets may be unpacked into _/_u_s_r_/_s_r_c with the command: # ccdd // ;; ttaarr --zzxxppff sseett__nnaammee..ttggzz In each of the source distribution set directories, there are files which contain the checksums of the files in the directory: BSDSUM Historic BSD checksums for the various files in that directory, in the format produced by the command: cckkssuumm --oo 11 _f_i_l_e. CKSUM POSIX checksums for the various files in that directory, in the format produced by the command: cckkssuumm _f_i_l_e. MD5 MD5 digests for the various files in that directory, in the format produced by the command: cckkssuumm --aa MMDD55 _f_i_l_e. SHA512 SHA512 digests for the various files in that directory, in the format produced by the command: cckkssuumm --aa SSHHAA551122 _f_i_l_e. SYSVSUM Historic ATT System V UNIX checksums for the various files in that directory, in the format produced by the command: cckkssuumm --oo 22 _f_i_l_e. The SHA512 digest is the safest checksum, followed by the MD5 digest, and finally the POSIX checksum. The other two checksums are provided only to ensure that the widest possible range of systems can check the integrity of the release files. _N_e_t_B_S_D_/_i_3_8_6 _s_u_b_d_i_r_e_c_t_o_r_y _s_t_r_u_c_t_u_r_e The i386-specific portion of the NetBSD 4.0.1 release is found in the _i_3_8_6 subdirectory of the distribution: _._._._/_N_e_t_B_S_D_-_4_._0_._1_/_i_3_8_6_/. It con- tains the following files and directories: _I_N_S_T_A_L_L_._h_t_m_l _I_N_S_T_A_L_L_._p_s _I_N_S_T_A_L_L_._t_x_t _I_N_S_T_A_L_L_._m_o_r_e Installation notes in various file formats, including this file. The _._m_o_r_e file contains underlined text using the more(1) conventions for indicating italic and bold display. _b_i_n_a_r_y_/ _k_e_r_n_e_l_/ _n_e_t_b_s_d_-_G_E_N_E_R_I_C_._g_z A gzipped NetBSD kernel containing code for everything supported in this release. _n_e_t_b_s_d_-_G_E_N_E_R_I_C_._M_P_._g_z A gzipped NetBSD kernel containing code for everything supported in this release. This kernel also supports SMP on systems with more than one CPU. _n_e_t_b_s_d_-_G_E_N_E_R_I_C_._N_O_A_C_P_I_._g_z A gzipped NetBSD kernel containing code for everything supported in this release but without ACPI support, for use on legacy hardware. _n_e_t_b_s_d_-_G_E_N_E_R_I_C___D_I_A_G_N_O_S_T_I_C_._g_z A gzipped NetBSD kernel containing code for everything supported in this release, with diagnostic messages enabled. _n_e_t_b_s_d_-_G_E_N_E_R_I_C___L_A_P_T_O_P_._g_z A version of GENERIC that has USB, PCM- CIA and CardBus enabled to allow installing on laptop machines. _n_e_t_b_s_d_-_I_N_S_T_A_L_L_._g_z A somewhat smaller installation kernel, which you can use to boot the system on memory-tight systems. This is the same kernel as present on the miniroot and on many install floppies. _n_e_t_b_s_d_-_I_N_S_T_A_L_L___L_A_P_T_O_P_._g_z A version of INSTALL that has USB, PCM- CIA and CardBus enabled to allow installing on laptop machines. _n_e_t_b_s_d_-_I_N_S_T_A_L_L___L_A_R_G_E_._g_z A version of INSTALL that has ACPI and some large disk and network drivers, to allow installing on the newest machines. This is the default boot kernel from the ISO images. _s_e_t_s_/ i386 binary distribution sets; see below. _i_n_s_t_a_l_l_a_t_i_o_n_/ _f_l_o_p_p_y_/ i386 boot and installation floppies; see below. _c_d_r_o_m_/ i386 bootable cdrom images; see below. _m_i_s_c_/ Miscellaneous i386 installation utilities; see installation section, below. _B_i_n_a_r_y _d_i_s_t_r_i_b_u_t_i_o_n _s_e_t_s The NetBSD i386 binary distribution sets contain the binaries which com- prise the NetBSD 4.0.1 release for the i386. The binary distribution sets can be found in the _i_3_8_6_/_b_i_n_a_r_y_/_s_e_t_s subdirectory of the NetBSD 4.0.1 distribution tree, and are as follows: bbaassee The NetBSD 4.0.1 i386 bbaassee binary distribution. You _m_u_s_t install this distribution set. It contains the base NetBSD utilities that are necessary for the system to run and be mini- mally functional. It includes shared library support, and excludes everything described below. _2_4 _M_B _g_z_i_p_p_e_d_, _6_9 _M_B _u_n_c_o_m_p_r_e_s_s_e_d ccoommpp Things needed for compiling programs. This set includes the system include files (_/_u_s_r_/_i_n_c_l_u_d_e) and the various system libraries (except the shared libraries, which are included as part of the bbaassee set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. _2_6 _M_B _g_z_i_p_p_e_d_, _8_9 _M_B _u_n_c_o_m_p_r_e_s_s_e_d eettcc This distribution set contains the system configuration files that reside in _/_e_t_c and in several other places. This set _m_u_s_t be installed if you are installing the system from scratch, but should _n_o_t be used if you are upgrading. _1 _M_B _g_z_i_p_p_e_d_, _1 _M_B _u_n_c_o_m_p_r_e_s_s_e_d ggaammeess This set includes the games and their manual pages. _3 _M_B _g_z_i_p_p_e_d_, _8 _M_B _u_n_c_o_m_p_r_e_s_s_e_d kkeerrnn--GGEENNEERRIICC This set contains a NetBSD/i386 4.0.1 GENERIC kernel, named _/_n_e_t_b_s_d. You _m_u_s_t install this distribution set. _5 _M_B _g_z_i_p_p_e_d_, _1_0 _M_B _u_n_c_o_m_p_r_e_s_s_e_d mmaann This set includes all of the manual pages for the binaries and other software contained in the bbaassee set. Note that it does not include any of the manual pages that are included in the other sets. _8 _M_B _g_z_i_p_p_e_d_, _3_3 _M_B _u_n_c_o_m_p_r_e_s_s_e_d mmiisscc This set includes the (rather large) system dictionaries, the typesettable document set, and other files from _/_u_s_r_/_s_h_a_r_e. _4 _M_B _g_z_i_p_p_e_d_, _1_2 _M_B _u_n_c_o_m_p_r_e_s_s_e_d tteexxtt This set includes NetBSD's text processing tools, including groff(1), all related programs, and their manual pages. _3 _M_B _g_z_i_p_p_e_d_, _1_1 _M_B _u_n_c_o_m_p_r_e_s_s_e_d NetBSD maintains its own set of sources for the X Window System in order to assure tight integration and compatibility. These sources are based on XFree86, and tightly track XFree86 releases. They are currently equivalent to XFree86 4.5.0. Binary sets for the X Window System are distributed with NetBSD. The sets are: xxbbaassee The basic files needed for a complete X client environment. This does not include the X servers. _6 _M_B _g_z_i_p_p_e_d_, _1_8 _M_B _u_n_c_o_m_p_r_e_s_s_e_d xxccoommpp The extra libraries and include files needed to compile X source code. _1_1 _M_B _g_z_i_p_p_e_d_, _3_9 _M_B _u_n_c_o_m_p_r_e_s_s_e_d xxffoonntt Fonts needed by the X server and by X clients. _3_1 _M_B _g_z_i_p_p_e_d_, _3_9 _M_B _u_n_c_o_m_p_r_e_s_s_e_d xxeettcc Configuration files for X which could be locally modified. _0_._0_3 _M_B _g_z_i_p_p_e_d_, _0_._1_7 _M_B _u_n_c_o_m_p_r_e_s_s_e_d xxsseerrvveerr The X server. This includes all XFree86 X servers. Because all of them are included, this set is large. However, you will only need one of the servers provided in this set. (Typically, XXFFrreeee8866). _9 _M_B _g_z_i_p_p_e_d_, _2_5 _M_B _u_n_c_o_m_p_r_e_s_s_e_d The i386 binary distribution sets are distributed as gzipped tar files named with the extension ..ttggzz, e.g. _b_a_s_e_._t_g_z. The instructions given for extracting the source sets work equally well for the binary sets, but it is worth noting that if you use that method, the filenames stored in the sets are relative and therefore the files are extracted _b_e_l_o_w _t_h_e _c_u_r_r_e_n_t _d_i_r_e_c_t_o_r_y. Therefore, if you want to extract the binaries into your system, i.e. replace the system binaries with them, you have to run the ttaarr --xxppff command from the root directory ( _/ ) of your system. This utility is used only in a Traditional method installation. _N_o_t_e_: Each directory in the i386 binary distribution also has its own checksum files, just as the source distribution does. NNeettBBSSDD//ii338866 SSyysstteemm RReeqquuiirreemmeennttss aanndd SSuuppppoorrtteedd DDeevviicceess NetBSD 4.0.1 runs on ISA (AT-Bus), EISA, MCA, PCI, and VL-bus systems with 386-family processors, with or without math coprocessors. The mini- mal configuration is said to require 4 MB of RAM and 50 MB of disk space, though we do not know of anyone running with a system quite this minimal today. To install the entire system requires much more disk space (the unpacked binary distribution, without sources, requires at least 65 MB without counting space needed for swap space, etc), and to run X or com- pile the system, more RAM is recommended. (4 MB of RAM will actually allow you to run X and/or compile, but it won't be speedy. Note that until you have around 16 MB of RAM, getting more RAM is more important than getting a faster CPU.) _S_u_p_p_o_r_t_e_d _d_e_v_i_c_e_s Explanation of bracketted footnote tags [] follows this listing. ++oo Floppy controllers. ++oo MFM, ESDI, IDE, and RLL hard disk controllers. There is complete support (including IDE DMA or Ultra-DMA) for the following PCI controllers -- Acard ATA-850 and 860 based IDE Controllers -- Acer labs M5229 IDE Controller -- Advanced Micro Devices AMD-756, 766, and 768 IDE Con- trollers -- CMD Tech PCI0643, 0646, 0648, and 0649 IDE Controllers -- Contaq Microsystems/Cypress CY82C693 IDE Controller -- HighPoint HPT366, HPT370, HPT372, and HPT374. -- IBM ESDI Fixed Disk Controllers [m] -- Intel PIIX, PIIX3, and PIIX4 IDE Controllers -- Intel 82801 (ICH/ICH0/ICH2/ICH4/ICH5/ICH6) IDE Controllers -- Promise PDC20246 (Ultra/33), PDC20262 (Ultra/66), PDC20265/PDC20267 (Ultra/100), PDC20268 (Ultra/100TX2 and Ultra/100TX2v2), Ultra/133, Ultra/133TX2, and Ultra/133TX2v2. -- Promise SATA150 serial-ATA controllers: PDC20318, PDC20319, PDC20371, PDC20375, PDC20376, PDC20377, PDC20378 and PDC20379. -- Silicon Integrated System 5597/5598 IDE controller -- VIA Technologies VT82C586, VT82C586A, VT82C596A, VT82C686A, and VT8233A IDE Controllers Most of these controllers are only available in multifunction PCI chips. Other PCI IDE controllers are supported, but per- formance may not be optimal. ISA, ISA Plug and Play and PCMCIA IDE controllers are supported as well. ++oo SCSI host adapters -- Adaptec AHA-154xA, -B, -C, and -CF -- Adaptec AHA-1640 cards (MCA variant of AHA-1540) [m] -- Adaptec AHA-174x -- Adaptec AIC-6260 and AIC-6360 based boards, including the Adaptec AHA-152x, Adaptec APA-1460 (PCMCIA) and APA-1480 (CardBus), and the SoundBlaster SCSI host adapter. _N_o_t_e_: You cannot boot from these boards if they do not have a boot ROM; consequently only the AHA-152x and motherboards using this chip are likely to be bootable. -- Adaptec AHA-2910, 2915, 2920, and 2930C adapters. -- Adaptec AHA-2x4x[U][2][W] cards and onboard PCI designs using the AIC-7770, AIC-7850, AIC-7860, AIC-7870, AIC-7880 and AIC-789x chipsets. -- Adaptec AHA-394x[U][W] cards [b] -- Adaptec AHA-3950U2 cards -- Adaptec AHA-3960, 19160, and 29160 Ultra-160 adapters -- AdvanSys ABP-9x0[U][A] cards -- AdvanSys ABP-940UW[68], ABP-970UW[68], and ASB3940UW-00 cards -- AMD PCscsi-PCI (Am53c974) based SCSI adapters, including Tekram DC-390 -- BusLogic 54x (Adaptec AHA-154x clones) -- BusLogic 445, 74x, 9xx (but not the new `FlashPoint' series of BusLogic SCSI adapters) -- Qlogic ISP [12]0x0 SCSI/FibreChannel boards -- Seagate/Future Domain ISA SCSI adapter cards ++oo ST01/02 ++oo Future Domain TMC-885 ++oo Future Domain TMC-950 -- Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters ++oo Acculogic PCIpport ++oo ASUS SC-200 (requires NCR BIOS on motherboard to boot from disks) ++oo ASUS SC-875 ++oo ASUS SP3[G] motherboard onboard SCSI ++oo DEC Celebris XL/590 onboard SCSI ++oo Diamond FirePort 40 ++oo Lomas Data SCSI adapters ++oo NCR/SYM 8125 (and its many clones; be careful, some of these cards have a jumper to set the PCI interrupt; leave it on INT A!) ++oo Promise DC540 (a particularly common OEM model of the SYM 8125) ++oo Tekram DC-390U/F ++oo Tyan Yorktown -- Symbios Logic (NCR) 5380/53C400-based ISA SCSI host adapters [*] -- Ultrastor 14f, 34f, and (possibly) 24f -- Western Digital WD7000 SCSI and TMC-7000 host adapters (ISA cards only) ++oo MDA, CGA, VGA, SVGA, and HGC Display Adapters. _N_o_t_e_: Not all of the display adapters NetBSD/i386 can work with are supported by X. See the XFree86 FAQ for more information. ++oo Serial ports -- 8250/16450-based ports -- 16550/16650/16750-based ports -- AST-style 4-port serial cards [*] -- BOCA 8-port serial cards [*] -- BOCA 6-port (ioat) serial cards [*] -- IBM PC-RT 4-port serial cards [*] -- TCOM TC-400 (4-port), TC-800 (8-port) serial cards [*] -- Single-port Hayes ESP serial cards [*] -- Cyclades Cyclom-Y serial cards [*] [+] -- Addonics FlexPort 8S 8-port serial cards [*] -- Byte Runner Technologies TC-400 and TC-800 serial cards [*] -- PCI universal communication cards ++oo Parallel ports. [*] [+] ++oo Ethernet adapters -- AMD LANCE and PCnet-based ISA Ethernet adapters [*] ++oo Novell NE1500T ++oo Novell NE2100 ++oo Kingston 21xx ++oo Digital EtherWORKS II ISA adapters (DE200/DE201/DE202) -- AMD LANCE and PCnet-based MCA Ethernet adapters [m] ++oo SKNET Personal ++oo SKNET MC+ -- AMD PCnet-based PCI Ethernet adapters ++oo Addtron AE-350 ++oo BOCALANcard/PCI ++oo SVEC FD0455 ++oo X/Lan Add-On Adapter ++oo IBM #13H9237 PCI Ethernet Adapter -- ATT StarLAN 10, EN100, and StarLAN Fiber -- 3COM 3c501 -- 3COM 3c503 -- 3COM 3c505 [*] -- 3COM 3c507 -- 3COM 3c509, 3c579, 3c589, and 3c59X -- 3COM 3c523 EtherLink/MC [m] -- 3COM 3c529 EtherLink III [m] -- 3COM 3c90X (including 3c905B), 3c450, 3c55X, 3c575, 3c980, 3cSOHO100 -- Digital DC21x4x-based PCI Ethernet adapters ++oo Accton EN2242 ++oo ASUS PCI-DEC100TX+ ++oo Cogent EM1X0, EM960 (a.k.a. Adaptec ANA-69XX) ++oo Cogent EM964 [b] ++oo Cogent EM4XX [b] ++oo Compex Readylink PCI ++oo DANPEX EN-9400P3 ++oo Digital Celebris GL, GLST on-board ethernet ++oo DEC (Digital) PCI Ethernet/Fast Ethernet adapters (all) ++oo DLINK DFE500-TX ++oo JCIS Condor JC1260 ++oo Linksys PCI Fast Ethernet ++oo SMC EtherPower 10, 10/100 (PCI only!) ++oo SMC EtherPower^2 [b] ++oo Sundance ST-201 based ethernet adapters (including DLINK DFE550-TX and DFE580-TX) ++oo SVEC PN0455 ++oo SVEC FD1000-TP ++oo Znyx ZX34X -- Digital EtherWORKS III ISA adapters (DE203/DE204/DE205) [*] -- Digital DEPCM-BA (PCMCIA) and DE305 (ISA) NE2000-compatible cards -- BICC Isolan [* and not recently tested] -- Efficient Networks EN-155 and Adaptec AIC-590x ATM inter- faces -- Essential Communications Hippi (800 Mbit/s) -- Fujitsu MB86960A/MB86965A based cards ++oo Fujitsu FMV-180 series ++oo Allied-Telesis AT1700 series ++oo Allied-Telesis AT1700 series MCA [m] ++oo Allied-Telesis RE2000 series -- Intel EtherExpress 16 -- Intel EtherExpress PRO/10 -- Intel EtherExpress 100 Fast Ethernet adapters -- Intel Intel PRO/1000 Gigabit Ethernet adapters -- Novell NE1000, NE2000 (ISA, PCI, PCMCIA, ISA PnP) -- Realtek 8129/8139 based boards -- Realtek 8139C+/8169/8169S/8110S based boards -- SMC/WD 8003, 8013, and the SMC `Elite16' ISA boards -- SMC/WD 8003, 8013 and IBM PS/2 Adapter/A MCA boards [m] -- SMC/WD 8216 (the SMC `Elite16 Ultra' ISA boards) -- SMC 91C9x-based boards (ISA and PCMCIA) -- SMC EPIC/100 Fast Ethernet boards ++oo SMC Etherpower-II -- Texas Instruments ThunderLAN based ethernet boards ++oo Compaq Netelligent 10/100 TX ++oo Compaq ProLiant Integrated Netelligent 10/100 TX ++oo Compaq Netelligent 10 T (untested) ++oo Compaq Integrated NetFlex 3/P ++oo Compaq NetFlex 3/P in baseboard variant (the PCI vari- ant doesn't use the same chip!) ++oo Compaq Dual Port Netelligent 10/100 TX ++oo Compaq Deskpro 4000 5233MMX (untested) ++oo Texas Instruments TravelMate 5000 series laptop docking station Ethernet board -- VIA VT3043 (Rhine) and VT86C100A (Rhine-II) based ethernet boards ++oo D-Link DFE530TX ++oo FDDI adapters -- Digital DEFPA PCI FDDI adapters [*] [+] -- Digital DEFEA EISA FDDI adapters [*] [+] ++oo Token-Ring adapters -- IBM Token-Ring Network PC Adapter [+] -- IBM Token-Ring Network PC Adapter II [+] -- IBM Token-Ring Network Adapter/A [+] -- IBM Token-Ring Network 16/4 Adapter [+] -- IBM Token-Ring Network 16/4 Adapter/A [m] -- IBM 16/4 ISA Adapter [+] -- IBM Auto 16/4 Token-Ring ISA Adapter [+] -- 3COM 3C619 TokenLink [+] -- 3COM 3C319 TokenLink Velocity [+] ++oo Wireless network adapters -- 3Com AirConnect Wireless LAN -- ATT/Lucent/Agere WaveLAN/ORiNOCO IEEE (802.11) PCMCIA cards -- Aironet 4500/4800 and Cisco 340 series PCMCIA cards -- BayStack 650 802.11FH PCMCIA cards [*] [+] -- Corega Wireless LAN PCC-11 cards [*] [+] -- DEC/Cabletron RoamAbout 802.11 DS High Rate cards [*] [+] -- ELSA AirLancer MC-11 card [*] [+] -- Intersil Prism II -- Melco AIR CONNECT WLI-PCM-L11 cards [*] [+] -- NetWave AirSurfer PCMCIA cards [*] [+] ++oo High Speed Serial -- LAN Media Corporation SSI/LMC10000 (up to 10 Mbps) [*] [+] -- LAN Media Corporation HSSI/LMC5200 [*] [+] -- LAN Media Corporation DS3/LMC5245 [*] [+] ++oo Tape drives -- Most SCSI tape drives -- Seagate and OnStream ATAPI tape drives, possibly others -- QIC-02 and QIC-36 format (Archive- and Wangtek- compatible) tape drives [*] [+] ++oo CD-ROM drives -- Non-IDE Mitsumi CD-ROM drives [*] [+] _N_o_t_e_: The Mitsumi driver device probe is known to cause trouble with several devices! -- Most SCSI CD-ROM drives -- Most ATAPI CD-ROM drives. _N_o_t_e_: Some low-priced IDE CD-ROM drives are known for being not or not fully ATAPI compliant, and thus require some hack (generally an entry to a quirk ta- ble) to work with NetBSD. ++oo Mice -- ``Logitech'' -style bus mice [*] [+] -- Microsoft-style bus mice [*] [+] -- ``PS/2'' -style mice [*] [+] -- Serial mice (no kernel support necessary) ++oo Sound Cards -- Aria based sound cards [*] -- Cirrus Logic CS461x, CS4280 and CS4281 audio [*] [+] -- Ensoniq AudioPCI [*] [+] -- ESS Technology ESS 1688 Audiodrive, ES1777/1868/1869/1887/1888/888, Maestro 1/2/2E and Solo-1 ES1938/1946 [*] [+] -- Gravis Ultrasound Plug and Play [*] [+] -- Gravis Ultrasound and Ultrasound Max [*] [+] -- NeoMagic MagicMedia 256AV / 256ZX AC'97 audio [*] [+] -- Personal Sound System [*] [+] -- ProAudio Spectrum [*] [+] -- S3 SonicVibes [*] [+] -- SoundBlaster, SoundBlaster Pro, SoundBlaster 16 [*] [+] -- VIA VT82C686A southbridge integrated AC97 audio [*] [+] -- Windows Sound System [*] [+] -- Yamaha YMF724/740/744/754 audio (DS-1 series) [*] [+] -- Yamaha OPL3-SA3 audio [*] [+] ++oo Game Ports (Joysticks) [*] [+] ++oo Miscellaneous -- Advanced power management (APM) [*] -- Advanced Configuration and Power Interface (ACPI) [*] [+] ++oo Universal Serial Bus (USB) -- UHCI host controllers [*] [+] -- OHCI host controllers [*] [+] -- Hubs [*] [+] -- Keyboards using the boot protocol [*] [+] -- Mice [*] [+] -- Printers [*] [+] -- Modems using Abstract Control Model [*] [+] -- Generic support for HID devices [*] [+] -- Ethernet adapters [*] [+] -- Audio devices [*] [+] -- driver for FTDI based serial adapters [*] [+] -- Mass storage devices such as disks, ZIP drives and digital cameras [*] [+] -- driver for the Prolific host-to-host adapter [*] [+] -- Handspring Visor driver [*] [+] ++oo PCMCIA Controllers. ISA, PCI, and ISA Plug and Play attachments -- Intel 82365 PCIC, rev 0 and rev 1 -- Cirrus PD6710 -- Cirrus PD672X _N_o_t_e_: This will work with most laptops as well as with ISA cards which provide PCMCIA slots for desktops. ++oo RAID Controllers -- 3ware Escalade family of controllers -- Compaq Integrated Array (PCI) [b] -- Compaq IAES (EISA) -- Compaq IDA, IDA-2 (EISA) -- Compaq Smart Array 221, 3100ES, 3200, 4200, 4250ES (PCI) [b] -- Compaq Smart Array 431, RAID LC2 [b] -- Compaq SMART 2, 2/E (EISA) -- Compaq SMART 2/E, 2/P, 2DH, 2SL (PCI) [b] -- DELL RAID controllers ++oo PERC 2/SC ++oo PERC 2/DC ++oo PERC 4/Di ++oo PERC 4/SC ++oo PERC 4e/Si ++oo CERC 1.5 -- DPT SCSI RAID boards (ISA [*], EISA and PCI) ++oo SmartCache III ++oo SmartCache IV ++oo SmartRAID III ++oo SmartRAID IV -- MegaRAID controllers ++oo 320-1 ++oo 320-2 ++oo Series 418 ++oo Enterprise 1200 (Series 428) ++oo Enterprise 1300 (Series 434) ++oo Enterprise 1400 (Series 438) ++oo Enterprise 1500 (Series 467) ++oo Enterprise 1600 (Series 471) ++oo Elite 1500 (Series 467) ++oo Elite 1600 (Series 493) ++oo Express 100 (Series 466WS) ++oo Express 200 (Series 466) ++oo Express 300 (Series 490) ++oo Express 500 (Series 475) Specific driver footnotes: [*] Drivers are _n_o_t present in kernels on the distribution floppies. Except as noted above, all drivers are present on all disks. Also, at the present time, the distributed kernels support only one SCSI host adapter per machine. NetBSD normally allows more, though, so if you have more than one, you can use all of them by compiling a custom kernel once NetBSD is installed. [+] Support _i_s included in the GENERIC kernels, although it is not in the kernels which are on the distribution floppies. [b] Devices require BIOS support for PCI-PCI bridging on your mother- board. Most reasonably modern Pentium motherboards have this sup- port, or can acquire it via a BIOS upgrade. [m] Devices are only supported by MCA-enabled kernels. GGeettttiinngg tthhee NNeettBBSSDD SSyysstteemm oonn ttoo UUsseeffuull MMeeddiiaa If you are not booting off a CD-ROM, you will need to have some floppy disks to boot off; either three 1.44 MB floppies or one 1.2 MB floppy. For laptops that have cardbus slots, you should use the _b_o_o_t_l_a_p_1_._f_s and _b_o_o_t_l_a_p_2_._f_s floppy images. For older machines with little RAM, use _b_o_o_t_-_t_i_n_y_._f_s. This image is tai- lored towards old, small-memory systems, and thus does not contain any PCI or SCSI support. It should work on systems with 4M of RAM. Note that this means 4M available to NetBSD; systems that are said to have 4M may have 640k of base memory and 3072k of extended memory, which cur- rently will not work, as this is a total of 3712k. For old machines that may have EISA, SCSI and more RAM, but only have a 1.2M floppy drive, use _b_o_o_t_-_s_m_a_l_l_1_._f_s and _b_o_o_t_-_s_m_a_l_l_2_._f_s. For old IBM PS/2 machines with MCA, use _b_o_o_t_-_p_s_2_-_1_._f_s and _b_o_o_t_-_p_s_2_-_2_._f_s floppy images. For all other systems, use _b_o_o_t_1_._f_s and _b_o_o_t_2_._f_s For the 2-floppy sets (and the CD boot image), utilities to repair a badly crashed systems are included. The _b_o_o_t_-_t_i_n_y_._f_s image has a sepa- rate _r_e_s_c_u_e_-_t_i_n_y_._f_s rescue floppy image because of lack of space. If you are using a UNIX-like system to write the floppy images to disks, you should use the dd command to copy the file system image(s) (.fs file) directly to the raw floppy disk. It is suggested that you read the dd(1) manual page or ask your system administrator to determine the correct set of arguments to use; it will be slightly different from system to system, and a comprehensive list of the possibilities is beyond the scope of this document. If you are using MS-DOS to write the floppy image(s) to floppy disk, you should use the rraawwrriittee utility, provided in the _i_3_8_6_/_i_n_s_t_a_l_l_a_t_i_o_n_/_m_i_s_c directory of the NetBSD distribution. It will write a file system image (.fs file) to a floppy disk. A rraawwrriittee3322 is also available that runs under MS Windows. Note that if you are installing or upgrading from a writable media, the media can be write-protected if you wish. These systems mount a root image from inside the kernel, and will not need to write to the media. If you booted from a floppy, the floppy disk may be removed from the drive after the system has booted. Installation is supported from several media types, including: ++oo CD-ROM / DVD ++oo MS-DOS floppy ++oo FTP ++oo Remote NFS partition ++oo Tape ++oo Existing NetBSD partitions, if performing an upgrade The steps necessary to prepare the distribution sets for installation depend upon which installation medium you choose. The steps for the var- ious media are outlined below. _C_D_-_R_O_M _/ _D_V_D Find out where the distribution set files are on the CD- ROM or DVD. Likely locations are _b_i_n_a_r_y_/_s_e_t_s and _i_3_8_6_/_b_i_n_a_r_y_/_s_e_t_s. Proceed to the instruction on installation. _M_S_-_D_O_S _f_l_o_p_p_y NetBSD doesn't include split sets to keep the distribution size down. They can be created on a separate machine using the split(1) command, running e.g. sspplliitt --bb 223355kk bbaassee..ttggzz bbaassee.. to split the _b_a_s_e_._t_g_z file from _i_3_8_6_/_b_i_n_a_r_y_/_s_e_t_s into files named _b_a_s_e_._a_a, _b_a_s_e_._a_b, and so on. Repeat this for all _s_e_t___n_a_m_e_._t_g_z files, splitting them into _s_e_t___n_a_m_e_._x_x files. Count the number of _s_e_t___n_a_m_e_._x_x files that make up the distribution sets you want to install or upgrade. You will need one fifth that number of 1.2 MB floppies, or one sixth that number of 1.44 MB floppies. You should only use one size of floppy for the install or upgrade procedure; you can't use some 1.2 MB floppies and some 1.44 MB floppies. Format all of the floppies with MS-DOS. Do _n_o_t make any of them bootable MS-DOS floppies, i.e. don't use format /s to format them. (If the floppies are bootable, then the MS-DOS system files that make them bootable will take up some space, and you won't be able to fit the distribution set parts on the disks.) If you're using floppies that are formatted for MS-DOS by their manufacturers, they probably aren't bootable, and you can use them out of the box. Place all of the _s_e_t___n_a_m_e_._x_x files on the MS-DOS disks. Once you have the files on MS-DOS disks, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the sec- tion on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. _F_T_P The preparations for this installation/upgrade method are easy; all you need to do is make sure that there's an FTP site from which you can retrieve the NetBSD distribution when you're about to install or upgrade. If you don't have DHCP available on your network, you will need to know the numeric IP address of that site, and, if it's not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself. If you don't have access to a functioning nameserver during installation, the IPv4 address of ffttpp..NNeettBBSSDD..oorrgg is 204.152.190.13 and the IPv6 address is 2001:4f8:4:7:230:48ff:fe31:43f2 (as of Decem- ber, 2007). Once you have this information, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. _N_o_t_e_: This method of installation is recommended for those familiar with using BSD network configuration and management commands. If you aren't, this docu- mentation should help, but is not intended to be all-encompassing. _N_F_S Place the NetBSD distribution sets you wish to install into a directory on an NFS server, and make that directory mountable by the machine on which you are installing or upgrading NetBSD. This will probably require modifying the _/_e_t_c_/_e_x_p_o_r_t_s file on the NFS server and resetting its mount daemon (mountd). (Both of these actions will proba- bly require superuser privileges on the server.) You need to know the numeric IP address of the NFS server, and, if you don't have DHCP available on your network and the server is not on a network directly connected to the machine on which you're installing or upgrading NetBSD, you need to know the numeric IP address of the router closest to the NetBSD machine. Finally, you need to know the numeric IP address of the NetBSD machine itself. Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on pre- paring your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. _N_o_t_e_: This method of installation is recommended for those already familiar with using BSD network con- figuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. _T_a_p_e To install NetBSD from a tape, you need to make a tape that contains the distribution set files, in `tar' format. If you're making the tape on a UNIX-like system, the easi- est way to do so is probably something like: # ttaarr --ccff _t_a_p_e___d_e_v_i_c_e _d_i_s_t___d_i_r_e_c_t_o_r_i_e_s where _t_a_p_e___d_e_v_i_c_e is the name of the tape device that describes the tape drive you're using; possibly _/_d_e_v_/_r_s_t_0, or something similar, but it will vary from system to sys- tem. (If you can't figure it out, ask your system admin- istrator.) In the above example, _d_i_s_t___d_i_r_e_c_t_o_r_i_e_s are the distribution sets' directories, for the distribution sets you wish to place on the tape. For instance, to put the kkeerrnn--GGEENNEERRIICC,, bbaassee,, and eettcc distributions on tape (in order to do the absolute minimum installation to a new disk), you would do the following: # ccdd ......//NNeettBBSSDD--44..00..11 # ccdd ii338866//bbiinnaarryy # ttaarr --ccff _t_a_p_e___d_e_v_i_c_e kkeerrnn--GGEENNEERRIICC bbaassee eettcc _N_o_t_e_: You still need to fill in _t_a_p_e___d_e_v_i_c_e in the example. Once you have the files on the tape, you can proceed to the next step in the installation or upgrade process. If you're installing NetBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. PPrreeppaarriinngg yyoouurr SSyysstteemm ffoorr NNeettBBSSDD iinnssttaallllaattiioonn First and foremost, before beginning the installation process, _m_a_k_e _s_u_r_e _y_o_u _h_a_v_e _a _r_e_l_i_a_b_l_e _b_a_c_k_u_p of any data on your hard disk that you wish to keep. Mistakes in partitioning your hard disk may lead to data loss. Before you begin, you should be aware of the geometry issues that may arise in relation to your hard disk. First of all, you should know about sector size. You can count on this to be 512 bytes; other sizes are rare (and currently not supported). Of particular interest are the number of sectors per track, the number of tracks per cylinder (also known as the number of heads), and the number of cylinders. Together they describe the disk geometry. The BIOS has a limit of 1024 cylinders and 63 sectors per track for doing BIOS I/O. This is because of the old programming interface to the BIOS that restricts these values. Most of the big disks currently being used have more than 1024 real cylinders. Some have more than 63 sectors per track. Therefore, the BIOS can be instructed to use a fake geometry that accesses most of the disk and the fake geometry has less than or equal to 1024 cylinders and less than or equal to 63 sectors. This is possible because the disks can be addressed in a way that is not restricted to these values, and the BIOS can internally perform a translation. This can be activated in most modern BIOSes by using _L_a_r_g_e or _L_B_A mode for the disk. NetBSD does not have the mentioned limitations with regard to the geome- try. However, since the BIOS has to be used during startup, it is impor- tant to know about the geometry the BIOS uses. The NetBSD kernel should be on a part of the disk where it can be loaded using the BIOS, within the limitations of the BIOS geometry. The install program will check this for you, and will give you a chance to correct this if this is not the case. If you have not yet installed any other systems on the hard disk that you plan to install NetBSD on, or if you plan to use the disk entirely for NetBSD, you may wish to check your BIOS settings for the `Large' or `LBA' modes, and activate them for the hard disk in question. While they are not needed by NetBSD as such, doing so will remove the limitations men- tioned above, and will avoid hassle should you wish to share the disk with other systems. Do _n_o_t change these settings if you already have data on the disk that you want to preserve! In any case, it is wise to check your the BIOS settings for the hard disk geometry before beginning the installation, and write them down. While this should usually not be needed, it enables you to verify that the install program determines these values correctly. The geometry that the BIOS uses will be referred to as the _B_I_O_S _g_e_o_m_e_t_r_y, the geometry that NetBSD uses is the _r_e_a_l _g_e_o_m_e_t_r_y. ssyyssiinnsstt, the NetBSD installation program, will try to discover both the real geometry and BIOS geometry. It is _i_m_p_o_r_t_a_n_t that ssyyssiinnsstt know the proper BIOS geometry to be able to get NetBSD to boot, regardless of where on your disk you put it. It is less of a concern if the disk is going to be used entirely for NetBSD. If you intend to have several OSes on your disk, this becomes a much larger issue. IInnssttaalllliinngg tthhee NNeettBBSSDD SSyysstteemm _R_u_n_n_i_n_g _t_h_e _s_y_s_i_n_s_t _i_n_s_t_a_l_l_a_t_i_o_n _p_r_o_g_r_a_m 1. _I_n_t_r_o_d_u_c_t_i_o_n Using ssyyssiinnsstt, installing NetBSD is a relatively easy process. You still should read this document and have it in hand when doing the installation process. This document tries to be a good guideline for the installation and as such covers many details for the sake of completeness. Do not let this discourage you; the install program is not hard to use. 2. _P_o_s_s_i_b_l_e _h_a_r_d_w_a_r_e _p_r_o_b_l_e_m_s Should you encounter hardware problems during installation, try rebooting after unplugging removable devices you don't need for installation. Non-removable devices can be disabled with uusseerrccoonnff (use bboooott --cc to enter it). 3. _G_e_n_e_r_a_l The following is a walk-through of the steps you will take while getting NetBSD installed on your hard disk. ssyyssiinnsstt is a menu driven installation system that allows for some freedom in doing the installation. Sometimes, questions will be asked and in many cases the default answer will be displayed in brackets (``[ ]'') after the question. If you wish to stop the installation, you may press CONTROL-C at any time, but if you do, you'll have to begin the installation process again from scratch by running the _/_s_y_s_i_n_s_t pro- gram from the command prompt. It is not necessary to reboot. 4. _Q_u_i_c_k _i_n_s_t_a_l_l First, let's describe a quick install. The other sections of this document go into the installation procedure in more detail, but you may find that you do not need this. If you want detailed instruc- tions, skip to the next section. This section describes a basic installation, using a CD-ROM install as an example. ++oo What you need. -- The distribution sets (in this example, they are on CD). -- Two 1.44 MB 3.5" floppy disks if the CD is not bootable or if you cannot boot from CD. -- A PC with a 386 or newer processor. -- A CD-ROM drive (SCSI or ATAPI), a hard disk and a minimum of 4 MB of memory installed. -- The hard disk should have at least 200 + _n megabytes of space free, where _n is the number of megabytes of main mem- ory in your system. If you wish to install the X Window System as well, you will need at least 120 MB more. ++oo Creating the boot floppies. You can create the floppies needed for installation under MS-DOS or Windows. Supposing your 1.44 MB floppy drive is drive A:, and your CD is drive E: do the fol- lowing from an MS-DOS command prompt: ee:: ccdd \\NNeettBBSSDD--44..00..11\\ii338866\\iinnssttaallllaattiioonn\\mmiisscc rraawwrriittee When asked for a source filename, answer _._._\_f_l_o_p_p_y_\_b_o_o_t_1_._f_s for the first diskette and _._._\_f_l_o_p_p_y_\_b_o_o_t_2_._f_s for the second diskette. When asked for a destination drive answer `aa'. ++oo To create a bootfloppy under NetBSD or other UNIX-like system, you would type something like: # dddd iiff==......//bboooott11..ffss ooff==//ddeevv//rrffdd00aa bbss==1188kk ++oo The Quick Installation -- Insert the first boot floppy you just created. Restart the computer. When prompted, insert the second boot floppy. After language selection, the main menu will be displayed. .***********************************************. * NetBSD-4.0.1 Install System * * * *>a: Install NetBSD to hard disk * * b: Upgrade NetBSD on a hard disk * * c: Re-install sets or install additional sets * * d: Reboot the computer * * e: Utility menu * * x: Exit Install System * .***********************************************. -- If you wish, you can configure some network settings immedi- ately by choosing the UUttiilliittyy mmeennuu and then CCoonnffiigguurree nneettwwoorrkk. It isn't actually required at this point, but it may be more convenient. Go back to the main menu. -- Choose iinnssttaallll. -- You will be guided through some steps regarding the setup of your disk, and the selection of distributed components to install. When in doubt, refer to the rest of this document for details. -- After your disk has been prepared, choose CCDD--RROOMM as the medium. The default values for the path and device should be ok. -- After all the files have been unpacked, go back to the main menu and select rreebboooott, after you have removed the boot- floppy from the drive. -- NetBSD will now boot. If you haven't already done so in ssyyssiinnsstt, you should log in as root, and set a password for that account. You are also advised to edit the file _/_e_t_c_/_r_c_._c_o_n_f to match your system needs. -- Your installation is now complete. -- For configuring the X window system, if installed, see the files in _/_u_s_r_/_X_1_1_R_6_/_l_i_b_/_X_1_1_/_d_o_c. Further information can be found on hhttttpp::////wwwwww..xxffrreeee8866..oorrgg//. 5. _B_o_o_t_i_n_g _N_e_t_B_S_D Boot your machine. The boot loader will start, and will print a countdown and begin booting. If the boot loader messages do not appear in a reasonable amount of time, you either have a bad boot floppy or a hardware problem. Try writing the install floppy image to a different disk, and using that. If that doesn't work, try booting after disabling your CPU's inter- nal and external caches (if any). If it still doesn't work, NetBSD probably can't be run on your hardware. This can probably be con- sidered a bug, so you might want to report it. If you do, please include as many details about your system configuration as you can. It will take a while to load the kernel from the floppy, probably around a minute or so, then, the kernel boot messages will be dis- played. This may take a little while also, as NetBSD will be prob- ing your system to discover which hardware devices are installed. You may want to read the boot messages, to notice your disk's name and geometry. Its name will be something like sd0 or wd0 and the geometry will be printed on a line that begins with its name. As mentioned above, you may need your disk's geometry when creating NetBSD's partitions. You will also need to know the name, to tell ssyyssiinnsstt on which disk to install. The most important thing to know is that wd0 is NetBSD's name for your first IDE disk, wd1 the sec- ond, etc. sd0 is your first SCSI disk, sd1 the second, etc. Note that once the system has finished booting, you need not leave the floppy in the disk drive. Once NetBSD has booted and printed all the boot messages, you will be presented with a welcome message and a main menu. It will also include instructions for using the menus. 6. _N_e_t_w_o_r_k _c_o_n_f_i_g_u_r_a_t_i_o_n If you will not use network operation during the installation, but you do want your machine to be configured for networking once it is installed, you should first go to the UUttiilliittyy mmeennuu, and select the CCoonnffiigguurree nneettwwoorrkk option. If you only want to temporarily use net- working during the installation, you can specify these parameters later. If you are not using the Domain Name System (DNS), you can give an empty response in reply to answers relating to this. 7. _I_n_s_t_a_l_l_a_t_i_o_n _d_r_i_v_e _s_e_l_e_c_t_i_o_n _a_n_d _p_a_r_a_m_e_t_e_r_s To start the installation, select IInnssttaallll NNeettBBSSDD ttoo hhaarrdd ddiisskk from the main menu. The first thing is to identify the disk on which you want to install NetBSD. ssyyssiinnsstt will report a list of disks it finds and ask you for your selection. Depending on how many disks are found, you may get a different message. You should see disk names like wd0, wd1, sd0 or sd1. ssyyssiinnsstt next tries to figure out the real and BIOS geometry of your disk. It will present you with the values it found, if any, and will give you a chance to change them. Next, depending on whether you are using a wd_X or sd_X disk, you will either be asked for the type of disk (wd_X) you are using or you will be asked if you want to specify a fake geometry for your SCSI disk (sd_X). The types of disk are IDE, ST-506 or ESDI. If you're installing on an ST-506 or ESDI drive, you'll be asked if your disk supports automatic sector forwarding. If you are _s_u_r_e that it does, reply affirmatively. Otherwise, the install program will automati- cally reserve space for bad144 tables. 8. _P_a_r_t_i_t_i_o_n_i_n_g _t_h_e _d_i_s_k ++oo Which portion of the disk to use. You will be asked if you want to use the entire disk or only part of the disk. If you decide to use the entire disk for NetBSD, it will be checked if there are already other systems present on the disk, and you will be asked to confirm whether you want to overwrite these. If you want to use the entire disk for NetBSD, you can skip the fol- lowing section and go to _E_d_i_t_i_n_g _t_h_e _N_e_t_B_S_D _d_i_s_k_l_a_b_e_l. 9. _E_d_i_t_i_n_g _t_h_e _M_a_s_t_e_r _B_o_o_t _R_e_c_o_r_d First, you will be prompted to specify the units of size that you want to express the sizes of the partitions in. You can either pick megabytes, cylinders or sectors. After this, you will be presented with the current values stored in the MBR, and will be given the opportunity to change, create or delete partitions. For each partition you can set the type, the start and the size. Setting the type to uunnuusseedd will delete a parti- tion. You can also mark a partition as active, meaning that this is the one that the BIOS will start from at boot time. Be sure to mark the partition you want to boot from as active! After you are done editing the MBR, a sanity check will be done, checking for partitions that overlap. Depending on the BIOS capa- bilities of your machine and the parameters of the NetBSD partition you have specified, you may also be asked if you want to install newer bootcode in your MBR. If you have multiple operating systems on the disk that you are installing on, you will also be given the option to install a bootselector, that will allow you to pick the operating system to start up when your computer is (re-)started. If everything is ok, you can go on to the next step, editing the NetBSD disklabel. 10. _E_d_i_t_i_n_g _t_h_e _N_e_t_B_S_D _d_i_s_k_l_a_b_e_l The partition table of the NetBSD part of a disk is called a _d_i_s_k_l_a_b_e_l. There are 4 layouts for the NetBSD part of the disk that you can pick from: SSttaannddaarrdd,, SSttaannddaarrdd wwiitthh XX,, CCuussttoomm and UUssee EExxiissttiinngg. The first two use a set of default values (that you can change) suitable for a normal installation, possibly including X. With the CCuussttoomm option you can specify everything yourself. The last option uses the partition info already present on the disk. You will be presented with the current layout of the NetBSD diskla- bel, and given a chance to change it. For each partition, you can set the type, offset and size, block and fragment size, and the mount point. The type that NetBSD uses for normal file storage is called 44..22BBSSDD. A swap partition has a special type called sswwaapp. You can also specify a partition as type MMSSDDOOSS. This is useful if you share the disk with MS-DOS or Windows; NetBSD is able to access the files on these partitions. You can use the values from the MBR for the MS-DOS part of the disk to specify the partition of type MMSSDDOOSS (you don't have to do this now, you can always re-edit the disklabel to add this once you have installed NetBSD, or use mbrlabel(8) to help you updating your disklabel with data from the MBR). Some partitions in the disklabel have a fixed purpose. a Root partition (_/) b Swap partition. c The NetBSD portion of the disk. d The entire disk. e-p Available for other use. Traditionally, e is the par- tition mounted on _/_u_s_r, but this is historical prac- tice and not a fixed value. You will then be asked to name your disk's disklabel. The default response will be ok for most purposes. If you choose to name it something different, make sure the name is a single word and con- tains no special characters. You don't need to remember this name. 11. _P_r_e_p_a_r_i_n_g _y_o_u_r _h_a_r_d _d_i_s_k _Y_o_u _a_r_e _n_o_w _a_t _t_h_e _p_o_i_n_t _o_f _n_o _r_e_t_u_r_n. Nothing has been written to your disk yet, but if you confirm that you want to install NetBSD, your hard drive will be modified. If you are sure you want to pro- ceed, enter yes at the prompt. The install program will now label your disk and make the file sys- tems you specified. The file systems will be initialized to contain NetBSD bootstrapping binaries and configuration files. You will see messages on your screen from the various NetBSD disk preparation tools that are running. There should be no errors in this section of the installation. If there are, restart from the beginning of the installation process. Otherwise, you can continue the installa- tion program after pressing the return key. 12. _G_e_t_t_i_n_g _t_h_e _d_i_s_t_r_i_b_u_t_i_o_n _s_e_t_s The NetBSD distribution consists of a number of _s_e_t_s, that come in the form of gzipped tarfiles. A few sets must be installed for a working system, others are optional. At this point of the installa- tion, you will be presented with a menu which enables you to choose from one of the following methods of installing the sets. Some of these methods will first load the sets on your hard disk, others will extract the sets directly. For all these methods, the first step is making the sets available for extraction, and then do the actual installation. The sets can be made available in a few different ways. The following sections describe each of those methods. After reading the one about the method you will be using, you can continue to the section labeled `Extracting the distribution sets'. 13. _I_n_s_t_a_l_l_a_t_i_o_n _u_s_i_n_g _f_t_p To be able to install using ftp, you first need to configure your network setup, if you haven't already at the start of the install procedure. ssyyssiinnsstt will do this for you, asking you if you want to use DHCP, and if not to provide data like IP address, hostname, etc. If you do not have name service set up for the machine that you are installing on, you can just press RETURN in answer to these ques- tions, and DNS will not be used. You will also be asked to specify the host that you want to transfer the sets from, the directory on that host, the account name and password used to log into that host using ftp, and optionally a proxy server to use. If you did not set up DNS when answering the questions to configure networking, you will need to specify an IP address instead of a hostname for the ftp server. ssyyssiinnsstt will proceed to transfer all the default set files from the remote site to your hard disk. 14. _I_n_s_t_a_l_l_a_t_i_o_n _u_s_i_n_g _N_F_S To be able to install using NFS, you first need to configure your network setup, if you haven't already at the start of the install procedure. ssyyssiinnsstt will do this for you, asking you if you want to use DHCP, and if not to provide data like IP address, hostname, etc. If you do not have name service set up for the machine that you are installing on, you can just press RETURN in answer to these ques- tions, and DNS will not be used. You will also be asked to specify the host that you want to transfer the sets from, and the directory on that host that the files are in. This directory should be mountable by the machine you are installing on, i.e. correctly exported to your machine. If you did not set up DNS when answering the questions to configure networking, you will need to specify an IP address instead of a hostname for the NFS server. 15. _I_n_s_t_a_l_l_a_t_i_o_n _f_r_o_m _C_D_-_R_O_M When installing from a CD-ROM, you will be asked to specify the device name for your CD-ROM player (usually cd0), and the directory name on the CD-ROM where the distribution files are. ssyyssiinnsstt will then check if the files are indeed available in the specified location, and proceed to the actual extraction of the sets. 16. _I_n_s_t_a_l_l_a_t_i_o_n _f_r_o_m _a _f_l_o_p_p_y _s_e_t Because the installation sets are too big to fit on one floppy, the floppies are expected to be filled with the split set files. The floppies are expected to be in MS-DOS format. You will be asked for a directory where the sets should be reassembled. Then you will be prompted to insert the floppies containing the split sets. This process will continue until all the sets have been loaded from floppy. 17. _I_n_s_t_a_l_l_a_t_i_o_n _f_r_o_m _a_n _u_n_m_o_u_n_t_e_d _f_i_l_e _s_y_s_t_e_m In order to install from a local file system, you will need to spec- ify the device that the file system resides on (for example sd1e) the type of the file system, and the directory on the specified file system where the sets are located. ssyyssiinnsstt will then check if it can indeed access the sets at that location. 18. _I_n_s_t_a_l_l_a_t_i_o_n _f_r_o_m _a _l_o_c_a_l _d_i_r_e_c_t_o_r_y This option assumes that you have already done some preparation yourself. The sets should be located in a directory on a file sys- tem that is already accessible. ssyyssiinnsstt will ask you for the name of this directory. 19. _E_x_t_r_a_c_t_i_n_g _t_h_e _d_i_s_t_r_i_b_u_t_i_o_n _s_e_t_s After the install sets containing the NetBSD distribution have been made available, you can either extract all the sets (a full instal- lation), or only extract sets that you have selected. In the latter case, you will be shown the currently selected sets, and given the opportunity to select the sets you want. Some sets always need to be installed (kkeerrnn,, bbaassee,, and eettcc) they will not be shown in this selection menu. Before extraction begins, you can elect to watch the files being extracted; the name of each file that is extracted will be shown. This can slow down the installation process considerably, especially on machines with slow graphics consoles or serial consoles. Alter- natively, you will be asked if you wish to have a progress bar. This is the preferred option as it shows progress without signifi- cantly slowing down the installation process. After all the files have been extracted, all the necessary device node files will be created. If you have already configured network- ing, you will be asked if you want to use this configuration for normal operation. If so, these values will be installed in the net- work configuration files. The next menu will allow you to select the time zone that you're in, to make sure your clock has the right offset from UTC. Finally you will be asked to select a password encryption algorithm and can then set a password for the "root" account, to prevent the machine coming up without access restric- tions. 20. _F_i_n_a_l_i_z_i_n_g _y_o_u_r _i_n_s_t_a_l_l_a_t_i_o_n Congratulations, you have successfully installed NetBSD 4.0.1. You can now reboot the machine, and boot NetBSD from hard disk. PPoosstt iinnssttaallllaattiioonn sstteeppss Once you've got the operating system running, there are a few things you need to do in order to bring the system into a properly configured state, with the most important ones described below. 1. Configuring _/_e_t_c_/_r_c_._c_o_n_f If you or the installation software haven't done any configuration of _/_e_t_c_/_r_c_._c_o_n_f (ssyyssiinnsstt usually will), the system will drop you into single user mode on first reboot with the message /etc/rc.conf is not configured. Multiuser boot aborted. and with the root file system (_/) mounted read-only. When the sys- tem asks you to choose a shell, simply press RETURN to get to a _/_b_i_n_/_s_h prompt. If you are asked for a terminal type, respond with vvtt222200 (or whatever is appropriate for your terminal type) and press RETURN. You may need to type one of the following commands to get your delete key to work properly, depending on your keyboard: # ssttttyy eerraassee ''^^hh'' # ssttttyy eerraassee ''^^??'' At this point, you need to configure at least one file in the _/_e_t_c directory. You will need to mount your root file system read/write with: # //ssbbiinn//mmoouunntt --uu --ww // Change to the _/_e_t_c directory and take a look at the _/_e_t_c_/_r_c_._c_o_n_f file. Modify it to your tastes, making sure that you set rc_configured=YES so that your changes will be enabled and a multi- user boot can proceed. Default values for the various programs can be found in _/_e_t_c_/_d_e_f_a_u_l_t_s_/_r_c_._c_o_n_f, where some in-line documentation may be found. More complete documentation can be found in rc.conf(5). If your _/_u_s_r directory is on a separate partition and you do not know how to use eedd, you will have to mount your _/_u_s_r partition to gain access to eexx or vvii. Do the following: # mmoouunntt //uussrr # eexxppoorrtt TTEERRMM==vvtt222200 If you have _/_v_a_r on a separate partition, you need to repeat that step for it. After that, you can edit _/_e_t_c_/_r_c_._c_o_n_f with vi(1). When you have finished, type eexxiitt at the prompt to leave the single- user shell and continue with the multi-user boot. Other values that need to be set in _/_e_t_c_/_r_c_._c_o_n_f for a networked environment are _h_o_s_t_n_a_m_e and possibly _d_e_f_a_u_l_t_r_o_u_t_e, furthermore add an _i_f_c_o_n_f_i_g___i_n_t for your <int> network interface, along the lines of ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0" or, if you have _m_y_n_a_m_e_._m_y_._d_o_m in _/_e_t_c_/_h_o_s_t_s: ifconfig_de0="inet myname.my.dom netmask 255.255.255.0" To enable proper hostname resolution, you will also want to add an _/_e_t_c_/_r_e_s_o_l_v_._c_o_n_f file or (if you are feeling a little more adventur- ous) run named(8). See resolv.conf(5) or named(8) for more informa- tion. Instead of manually configuring network and naming service, DHCP can be used by setting dhclient=YES in _/_e_t_c_/_r_c_._c_o_n_f. Other files in _/_e_t_c that may require modification or setting up include _/_e_t_c_/_m_a_i_l_e_r_._c_o_n_f, _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f, and _/_e_t_c_/_w_s_c_o_n_s_._c_o_n_f. 2. Logging in After reboot, you can log in as root at the login prompt. Unless you've set a password in ssyyssiinnsstt, there is no initial password. If you're using the machine in a networked environment, you should cre- ate an account for yourself (see below) and protect it and the ``root'' account with good passwords. By default, root login from the network is disabled (even via ssh(1)). One way to become root over the network is to log in as a different user that belongs to group ``wheel'' (see group(5)) and use su(1) to become root. Unless you have connected an unusual terminal device as the console you can just press RETURN when it prompts for Terminal type? [...]. 3. Adding accounts Use the useradd(8) command to add accounts to your system. Do not edit _/_e_t_c_/_p_a_s_s_w_d directly! See vipw(8) and pwd_mkdb(8) if you want to edit the password database. 4. The X Window System If you have installed the X Window System, look at the files in _/_u_s_r_/_X_1_1_R_6_/_l_i_b_/_X_1_1_/_d_o_c for information. You will need to set up a configuration file, see _/_u_s_r_/_X_1_1_R_6_/_l_i_b_/_X_1_1_/_X_F_8_6_C_o_n_f_i_g_._e_g for an example. The xf86cfg(1) and xf86config(1) utilities can interactively create a first version of such a configuration file for you. See hhttttpp::////wwwwww..xxffrreeee8866..oorrgg// and the XFree86 manual page for more information. Don't forget to add _/_u_s_r_/_X_1_1_R_6_/_b_i_n to your path in your shell's dot file so that you have access to the X binaries. 5. Installing third party packages If you wish to install any of the software freely available for UNIX-like systems you are strongly advised to first check the NetBSD package system. This automatically handles any changes necessary to make the software run on NetBSD, retrieval and installation of any other packages on which the software may depend, and simplifies installation (and deinstallation), both from source and precompiled binaries. ++oo More information on the package system is at hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddooccss//ssooffttwwaarree//ppaacckkaaggeess..hhttmmll ++oo A list of available packages suitable for browsing is at ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//NNeettBBSSDD//ppaacckkaaggeess//ppkkggssrrcc//RREEAADDMMEE..hhttmmll ++oo Precompiled binaries can be found at ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//ppkkggssrrcc//ppaacckkaaggeess//NNeettBBSSDD// usually in the _i_3_8_6_/_4_._0_/_A_l_l subdir. You can install them with the following commands under sh(1): ## PPKKGG__PPAATTHH==ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//ppkkggssrrcc//ppaacckkaaggeess//NNeettBBSSDD//ii338866//44..00//AAllll ## eexxppoorrtt PPKKGG__PPAATTHH ## ppkkgg__aadddd --vv ttccsshh ## ppkkgg__aadddd --vv bbaasshh ## ppkkgg__aadddd --vv ppeerrll ## ppkkgg__aadddd --vv aappaacchhee ## ppkkgg__aadddd --vv kkddee ## ppkkgg__aadddd --vv ffiirreeffooxx ... If you are using csh(1) then replace the first two lines with the following: ## sseetteennvv PPKKGG__PPAATTHH ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//ppkkggssrrcc//ppaacckkaaggeess//NNeettBBSSDD//ii338866//44..00//AAllll ... _N_o_t_e_: Some mirror sites don't mirror _/_p_u_b_/_p_k_g_s_r_c directory. If you would like to use such mirrors, you could also try the _/_p_u_b_/_N_e_t_B_S_D_/_p_a_c_k_a_g_e_s_/_c_u_r_r_e_n_t_-_p_a_c_k_a_g_e_s_/_N_e_t_B_S_D_/_i_3_8_6_/_4_._0_/_A_l_l directory which may have the same contents. The above commands will install the Tenex-csh and Bourne Again shell, the Perl programming language, Apache web server, KDE desktop environment and the Firefox web browser as well as all the packages they depend on. _N_o_t_e_: In some case the pkg_add(1) command will complain about a version mismatch of packages with a message like the fol- lowing: Warning: package `foo' was built for a different version of the OS: NetBSD/i386 4.0 (pkg) vs. NetBSD/i386 4.0.1 (this host), This warning would be harmless if the formal major release numbers are same between the pkg and your host. Please refer ``the NetBSD release glossary and graphs'': hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//rreelleeaasseess//rreelleeaassee--mmaapp..hhttmmll for details of the release numbering scheme of NetBSD. ++oo Package sources for compiling packages on your own can be obtained by retrieving the file ffttpp::////ffttpp..NNeettBBSSDD..oorrgg//ppuubb//NNeettBBSSDD//ppaacckkaaggeess//ppkkggssrrcc..ttaarr..ggzz They are typically extracted into _/_u_s_r_/_p_k_g_s_r_c (though other locations work fine), with the commands: # mmkkddiirr //uussrr//ppkkggssrrcc # ccdd //uussrr//ppkkggssrrcc # ttaarr --zzxxppff ppkkggssrrcc..ttaarr..ggzz After extracting, see the _R_E_A_D_M_E and _d_o_c_/_p_k_g_s_r_c_._t_x_t files in the extraction directory (e.g. _/_u_s_r_/_p_k_g_s_r_c_/_R_E_A_D_M_E) for more infor- mation. 6. Misc ++oo Edit _/_e_t_c_/_m_a_i_l_/_a_l_i_a_s_e_s to forward root mail to the right place. Don't forget to run newaliases(1) afterwards. ++oo The _/_e_t_c_/_p_o_s_t_f_i_x_/_m_a_i_n_._c_f file will almost definitely need to be adjusted. If you prefer a different MTA, then install it using the NetBSD package system or by hand and adjust _/_e_t_c_/_m_a_i_l_e_r_._c_o_n_f. ++oo Edit _/_e_t_c_/_r_c_._l_o_c_a_l to run any local daemons you use. ++oo Many of the _/_e_t_c files are documented in section 5 of the man- ual; so just invoking # mmaann 55 _f_i_l_e_n_a_m_e is likely to give you more information on these files. UUppggrraaddiinngg aa pprreevviioouussllyy--iinnssttaalllleedd NNeettBBSSDD SSyysstteemm The upgrade to NetBSD 4.0.1 is a binary upgrade; it can be quite diffi- cult to update the system from an earlier version by recompiling from source, primarily due to interdependencies in the various components. To do the upgrade, you must have the boot floppy set available. You must also have at least the bbaassee and kkeerrnn binary distribution sets available, so that you can upgrade with them, using one of the upgrade methods described above. Finally, you must have sufficient disk space available to install the new binaries. Since files already installed on the system are overwritten in place, you only need additional free space for files which weren't previously installed or to account for growth of the sets between releases. If you have a few megabytes free on each of your root (_/) and _/_u_s_r partitions, you should have enough space. Since upgrading involves replacing the kernel, the boot blocks on your NetBSD partition, and most of the system binaries, it has the potential to cause data loss. You are strongly advised to _b_a_c_k _u_p any important data on the NetBSD partition or on another operating system's partition on your disk before beginning the upgrade process. The upgrade procedure using the ssyyssiinnsstt tool is similar to an installa- tion, but without the hard disk partitioning. ssyyssiinnsstt will attempt to merge the settings stored in your _/_e_t_c directory with the new version of NetBSD. Getting the binary sets is done in the same manner as the installation procedure; refer to the installation part of the document for how to do this. Also, some sanity checks are done, i.e. file sys- tems are checked before unpacking the sets. After a new kernel has been copied to your hard disk, your machine is a complete NetBSD 4.0.1 system. However, that doesn't mean that you're finished with the upgrade process. You will probably want to update the set of device nodes you have in _/_d_e_v. If you've changed the contents of _/_d_e_v by hand, you will need to be careful about this, but if not, you can just cd into _/_d_e_v, and run the command: # sshh MMAAKKEEDDEEVV aallll Finally, you will want to delete old binaries that were part of the ver- sion of NetBSD that you upgraded from and have since been removed from the NetBSD distribution. NetBSD/i386 has switched its executable format from the old a.out format to ELF, the now more commonly used and supported format. Your old bina- ries will continue to work just fine. The installation procedure will try to take the necessary steps to accomplish this. The most important step is to move the old a.out shared libraries in _/_u_s_r_/_l_i_b and _/_u_s_r_/_X_1_1_R_6_/_l_i_b (if X was installed) to _/_e_m_u_l_/_a_o_u_t, where they will be automatically found if an older a.out binary is executed. ssyyssiinnsstt will use an existing _/_e_m_u_l and / or _/_e_m_u_l_/_a_o_u_t directory if available, and will create it (as a symbolic link to _/_u_s_r_/_a_o_u_t) if necessary. If you already had a _/_e_m_u_l directory, or a symbolic link by that name, ssyyssiinnsstt should rename it and tell you about it. CCoommppaattiibbiilliittyy IIssssuueess WWiitthh PPrreevviioouuss NNeettBBSSDD RReelleeaasseess Users upgrading from previous versions of NetBSD may wish to bear the following problems and compatibility issues in mind when upgrading to NetBSD 4.0.1. N.B. when using ssyyssiinnsstt for upgrading, it will automatically invoke postinstall fix and thus all issues that are fixed by ppoossttiinnssttaallll by default (see below) will be handled. _I_s_s_u_e_s _a_f_f_e_c_t_i_n_g _a_n _u_p_g_r_a_d_e _f_r_o_m _N_e_t_B_S_D _2_._1 _a_n_d _o_l_d_e_r _r_e_l_e_a_s_e_s_. See the section below on upgrading from NetBSD 3.x as well. It is vveerryy iimmppoorrttaanntt that you populate the directory _/_e_t_c_/_p_a_m_._d with appropriate configuration files for Pluggable Authentication Modules (PAM) because you will not be able to login any more otherwise. Using _p_o_s_t_i_n_s_t_a_l_l as described below will take care of this. Please refer to hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddooccss//gguuiiddee//eenn//cchhaapp--ppaamm..hhttmmll for documentation about PAM. The following issues can generally be resolved by running _p_o_s_t_i_n_s_t_a_l_l with the eettcc set : postinstall -s /path/to/etc.tgz check postinstall -s /path/to/etc.tgz fix Issues fixed by _p_o_s_t_i_n_s_t_a_l_l: ++oo Various files in _/_e_t_c need upgrading. These include: -- _/_e_t_c_/_d_e_f_a_u_l_t_s_/_* -- _/_e_t_c_/_m_t_r_e_e_/_* -- _/_e_t_c_/_p_a_m_._d_/_* -- _/_e_t_c_/_d_a_i_l_y -- _/_e_t_c_/_w_e_e_k_l_y -- _/_e_t_c_/_m_o_n_t_h_l_y -- _/_e_t_c_/_s_e_c_u_r_i_t_y -- _/_e_t_c_/_r_c_._s_u_b_r -- _/_e_t_c_/_r_c -- _/_e_t_c_/_r_c_._s_h_u_t_d_o_w_n -- _/_e_t_c_/_r_c_._d_/_* The following issues need to be resolved manually: ++oo The user `_pflogd' and the groups `_pflogd' and `authpf' need to be created. _I_s_s_u_e_s _a_f_f_e_c_t_i_n_g _a_n _u_p_g_r_a_d_e _f_r_o_m _N_e_t_B_S_D _3_._x _r_e_l_e_a_s_e_s_. The following issues can generally be resolved by running _p_o_s_t_i_n_s_t_a_l_l with the eettcc set : postinstall -s /path/to/etc.tgz check postinstall -s /path/to/etc.tgz fix Issues fixed by _p_o_s_t_i_n_s_t_a_l_l: ++oo Various files in _/_e_t_c need upgrading. These include: -- _/_e_t_c_/_d_e_f_a_u_l_t_s_/_* -- _/_e_t_c_/_m_t_r_e_e_/_* -- _/_e_t_c_/_d_a_i_l_y -- _/_e_t_c_/_w_e_e_k_l_y -- _/_e_t_c_/_m_o_n_t_h_l_y -- _/_e_t_c_/_s_e_c_u_r_i_t_y -- _/_e_t_c_/_r_c_._s_u_b_r -- _/_e_t_c_/_r_c -- _/_e_t_c_/_r_c_._s_h_u_t_d_o_w_n -- _/_e_t_c_/_r_c_._d_/_* -- _/_e_t_c_/_e_n_v_s_y_s_._c_o_n_f The following issues need to be resolved manually: ++oo The users `_proxy', `_rwhod', and `_sdpd' and the groups `_proxy', `_rwhod' and `_sdpd' need to be created and the user `uucp' needs to be updated. ++oo A number of things have been removed from the NetBSD 4.0 release including: the evbsh5 port, the Fortran 77 compiler (g77), NETCCITT, NETNS, Sendmail, Sushi, UUCP, and Vinum. If you were using any of these, then please see the "Components removed from NetBSD" section near the beginning of this docu- ment. ++oo The replacement of Sendmail by Postfix can be handled automati- cally by _p_o_s_t_i_n_s_t_a_l_l but it is not done by default. If you want to transition to Postfix, the command postinstall -s /path/to/etc.tgz fix mailerconf will update your _/_e_t_c_/_m_a_i_l_e_r_._c_o_n_f file to use Postfix as the MTA. When using ssyyssiinnsstt to upgrade the system, it will ask if you want this to be done. Note that if you have a customized Sendmail setup, you need to set up Postfix in an equivalent way; there is no tool for auto- matic conversion of Sendmail configuration to a Postfix one. Postfix will be started up automatically when the system boots. You may see messages like "$sendmail is not set properly" at boot. You can suppress them by removing _/_e_t_c_/_r_c_._d_/_s_e_n_d_m_a_i_l and _/_e_t_c_/_r_c_._d_/_s_m_m_s_p. Those files and other parts of sendmail con- figuration like files under _/_u_s_r_/_s_h_a_r_e_/_s_e_n_d_m_a_i_l are not removed by default while upgrading for those who want to continue using sendmail from outside the base system. If you want to delete them, _p_o_s_t_i_n_s_t_a_l_l can be used: postinstall -s /path/to/etc.tgz fix sendmail IIssssuueess wwiitthh GGDDBB 66..55 Some architectures (arm, i386, powerpc and sparc64) have switched to a newer gdb version (6.5) in this release. Unfortunately support for debugging programs using the SA (scheduler activation) based thread library, is incomplete in this gdb version. Furthermore kernel crash- dumps can not be debugged due to a missing identification in the kernel binaries. Both issues have been addressed on the wrstuden-fixsa branch, but did not make it into the NetBSD release. Both will be fixed in the next patch release. UUssiinngg oonnlliinnee NNeettBBSSDD ddooccuummeennttaattiioonn Documentation is available if you first install the manual distribution set. Traditionally, the ``man pages'' (documentation) are denoted by `name(section)'. Some examples of this are ++oo intro(1), ++oo man(1), ++oo apropros(1), ++oo passwd(1), and ++oo passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The _m_a_n command is used to view the documentation on a topic, and is started by entering mmaann [_s_e_c_t_i_o_n] _t_o_p_i_c. The brackets [] around the sec- tion should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the lowest numbered section name will be displayed. For instance, after log- ging in, enter # mmaann ppaasssswwdd to read the documentation for passwd(1). To view the documentation for passwd(5), enter # mmaann 55 ppaasssswwdd instead. If you are unsure of what man page you are looking for, enter # aapprrooppooss _s_u_b_j_e_c_t_-_w_o_r_d where _s_u_b_j_e_c_t_-_w_o_r_d is your topic of interest; a list of possibly related man pages will be displayed. AAddmmiinniissttrriivviiaa If you've got something to say, do so! We'd like your input. There are various mailing lists available via the mailing list server at _m_a_j_o_r_d_o_m_o_@_N_e_t_B_S_D_._o_r_g. To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instruc- tions. There are various mailing lists set up to deal with comments and ques- tions about this release. Please send comments to: _n_e_t_b_s_d_-_c_o_m_m_e_n_t_s_@_N_e_t_B_S_D_._o_r_g. To report bugs, use the send-pr(1) command shipped with NetBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: _n_e_t_b_s_d_-_b_u_g_s_@_N_e_t_B_S_D_._o_r_g. Use of send-pr(1) is encouraged, however, because bugs reported with it are entered into the NetBSD bugs database, and thus can't slip through the cracks. There are also port-specific mailing lists, to discuss aspects of each port of NetBSD. Use majordomo to find their addresses, or visit hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//mmaaiilliinngglliissttss//. If you're interested in doing a serious amount of work on a specific port, you probably should contact the `owner' of that port (listed below). If you'd like to help with this effort, and have an idea as to how you could be useful, send us mail or subscribe to: _n_e_t_b_s_d_-_u_s_e_r_s_@_N_e_t_B_S_D_._o_r_g. As a favor, please avoid mailing huge documents or files to these mailing lists. Instead, put the material you would have sent up for FTP or WWW somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. TThhaannkkss ggoo ttoo ++oo The former members of UCB's Computer Systems Research Group, includ- ing (but not limited to): Keith Bostic Ralph Campbell Mike Karels Marshall Kirk McKusick for their ongoing work on BSD systems, support, and encouragement. ++oo The Internet Systems Consortium, Inc. for hosting the NetBSD FTP, CVS, AnonCVS, mail, mail archive, GNATS, SUP, Rsync and WWW servers. ++oo The Internet Research Institute in Japan for hosting the server which runs the CVSweb interface to the NetBSD source tree. ++oo The Luleoa Academic Computer Society for providing the backup services server. ++oo The Columbia University Computer Science Department for hosting the NYC build cluster. ++oo The Western Washington University Computer Science Department for running the WWU build cluster that produces daily snapshots. ++oo The many organizations that provide NetBSD mirror sites. ++oo Without CVS, this project would be impossible to manage, so our hats go off to Brian Berliner, Jeff Polk, and the various other people who've had a hand in making CVS a useful tool. ++oo We list the individuals and organizations that have made donations or loans of hardware and/or money, to support NetBSD development, and deserve credit for it at hhttttpp::////wwwwww..NNeettBBSSDD..oorrgg//ddoonnaattiioonnss//.. (If you're not on that list and should be, tell us! We probably were not able to get in touch with you, to verify that you wanted to be listed.) ++oo Finally, we thank all of the people who've put sweat and tears into developing NetBSD since its inception in January, 1993. (Obviously, there are a lot more people who deserve thanks here. If you're one of them, and would like to be mentioned, tell us!) WWee aarree...... (in alphabetical order) _T_h_e _N_e_t_B_S_D _c_o_r_e _g_r_o_u_p_: Alistair Crooks _a_g_c_@_N_e_t_B_S_D_._o_r_g Quentin Garnier _c_u_b_e_@_N_e_t_B_S_D_._o_r_g Matt Thomas _m_a_t_t_@_N_e_t_B_S_D_._o_r_g YAMAMOTO Takashi _y_a_m_t_@_N_e_t_B_S_D_._o_r_g Christos Zoulas _c_h_r_i_s_t_o_s_@_N_e_t_B_S_D_._o_r_g _T_h_e _p_o_r_t_m_a_s_t_e_r_s _(_a_n_d _t_h_e_i_r _p_o_r_t_s_)_: Erik Berls _c_y_b_e_r_@_N_e_t_B_S_D_._o_r_g ccoobbaalltt Manuel Bouyer _b_o_u_y_e_r_@_N_e_t_B_S_D_._o_r_g xxeenn Simon Burge _s_i_m_o_n_b_@_N_e_t_B_S_D_._o_r_g eevvbbmmiippss Simon Burge _s_i_m_o_n_b_@_N_e_t_B_S_D_._o_r_g ppmmaaxx Simon Burge _s_i_m_o_n_b_@_N_e_t_B_S_D_._o_r_g ssbbmmiippss Julian Coleman _j_d_c_@_N_e_t_B_S_D_._o_r_g aattaarrii Marcus Comstedt _m_a_r_c_u_s_@_N_e_t_B_S_D_._o_r_g ddrreeaammccaasstt Andrew Doran _a_d_@_N_e_t_B_S_D_._o_r_g aammdd6644 Andrew Doran _a_d_@_N_e_t_B_S_D_._o_r_g ii338866 Matthias Drochner _d_r_o_c_h_n_e_r_@_N_e_t_B_S_D_._o_r_g cceessffiicc Gavan Fantom _g_a_v_a_n_@_N_e_t_B_S_D_._o_r_g iiyyoonniixx Jaime A Fournier _o_b_e_r_@_N_e_t_B_S_D_._o_r_g zzaauurruuss Matt Fredette _f_r_e_d_e_t_t_e_@_N_e_t_B_S_D_._o_r_g ssuunn22 Ichiro FUKUHARA _i_c_h_i_r_o_@_N_e_t_B_S_D_._o_r_g hhppccaarrmm Chris Gilbert _c_h_r_i_s_@_N_e_t_B_S_D_._o_r_g ccaattss Ben Harris _b_j_h_2_1_@_N_e_t_B_S_D_._o_r_g aaccoorrnn2266 Ross Harvey _r_o_s_s_@_N_e_t_B_S_D_._o_r_g aallpphhaa Nick Hudson _s_k_r_l_l_@_N_e_t_B_S_D_._o_r_g hhpp770000 Martin Husemann _m_a_r_t_i_n_@_N_e_t_B_S_D_._o_r_g ssppaarrcc6644 IWAMOTO Toshihiro _t_o_s_h_i_i_@_N_e_t_B_S_D_._o_r_g hhppccaarrmm Darrin Jewell _d_b_j_@_N_e_t_B_S_D_._o_r_g nneexxtt6688kk S/oren J/orvang _s_o_r_e_n_@_N_e_t_B_S_D_._o_r_g ssggiimmiippss Wayne Knowles _w_d_k_@_N_e_t_B_S_D_._o_r_g mmiippssccoo Takayoshi Kochi _k_o_c_h_i_@_N_e_t_B_S_D_._o_r_g iiaa6644 Paul Kranenburg _p_k_@_N_e_t_B_S_D_._o_r_g ssppaarrcc Michael Lorenz _m_a_c_a_l_l_a_n_@_N_e_t_B_S_D_._o_r_g mmaaccppppcc Anders Magnusson _r_a_g_g_e_@_N_e_t_B_S_D_._o_r_g vvaaxx Cherry G. Mathew _c_h_e_r_r_y_@_N_e_t_B_S_D_._o_r_g iiaa6644 NISHIMURA Takeshi _n_s_m_r_t_k_s_@_N_e_t_B_S_D_._o_r_g xx6688kk Tohru Nishimura _n_i_s_i_m_u_r_a_@_N_e_t_B_S_D_._o_r_g lluunnaa6688kk Tohru Nishimura _n_i_s_i_m_u_r_a_@_N_e_t_B_S_D_._o_r_g ssaannddppooiinntt Andrey Petrov _p_e_t_r_o_v_@_N_e_t_B_S_D_._o_r_g ssppaarrcc6644 Scott Reynolds _s_c_o_t_t_r_@_N_e_t_B_S_D_._o_r_g mmaacc6688kk Tim Rightnour _g_a_r_b_l_e_d_@_N_e_t_B_S_D_._o_r_g ooffppppcc Tim Rightnour _g_a_r_b_l_e_d_@_N_e_t_B_S_D_._o_r_g pprreepp Tim Rightnour _g_a_r_b_l_e_d_@_N_e_t_B_S_D_._o_r_g rrss66000000 Noriyuki Soda _s_o_d_a_@_N_e_t_B_S_D_._o_r_g aarrcc Ignatios Souvatzis _i_s_@_N_e_t_B_S_D_._o_r_g aammiiggaa Jonathan Stone _j_o_n_a_t_h_a_n_@_N_e_t_B_S_D_._o_r_g ppmmaaxx Shin Takemura _t_a_k_e_m_u_r_a_@_N_e_t_B_S_D_._o_r_g hhppccmmiippss Matt Thomas _m_a_t_t_@_N_e_t_B_S_D_._o_r_g aallpphhaa Matt Thomas _m_a_t_t_@_N_e_t_B_S_D_._o_r_g nneettwwiinnddeerr Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._o_r_g aallggoorr Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._o_r_g eevvbbaarrmm Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._o_r_g sshhaarrkk Izumi Tsutsui _t_s_u_t_s_u_i_@_N_e_t_B_S_D_._o_r_g eewwss44880000mmiippss Izumi Tsutsui _t_s_u_t_s_u_i_@_N_e_t_B_S_D_._o_r_g hhpp330000 Izumi Tsutsui _t_s_u_t_s_u_i_@_N_e_t_B_S_D_._o_r_g nneewwss6688kk Valeriy E. Ushakov _u_w_e_@_N_e_t_B_S_D_._o_r_g llaannddiisskk Nathan Williams _n_a_t_h_a_n_w_@_N_e_t_B_S_D_._o_r_g ssuunn33 Steve Woodford _s_c_w_@_N_e_t_B_S_D_._o_r_g eevvbbppppcc Steve Woodford _s_c_w_@_N_e_t_B_S_D_._o_r_g mmvvmmee6688kk Steve Woodford _s_c_w_@_N_e_t_B_S_D_._o_r_g mmvvmmeeppppcc Reinoud Zandijk _r_e_i_n_o_u_d_@_N_e_t_B_S_D_._o_r_g aaccoorrnn3322 _T_h_e _N_e_t_B_S_D _4_._0_._1 _R_e_l_e_a_s_e _E_n_g_i_n_e_e_r_i_n_g _t_e_a_m_: Grant Beattie _g_r_a_n_t_@_N_e_t_B_S_D_._o_r_g Manuel Bouyer _b_o_u_y_e_r_@_N_e_t_B_S_D_._o_r_g David Brownlee _a_b_s_@_N_e_t_B_S_D_._o_r_g James Chacon _j_m_c_@_N_e_t_B_S_D_._o_r_g Julian Coleman _j_d_c_@_N_e_t_B_S_D_._o_r_g Hoavard Eidnes _h_e_@_N_e_t_B_S_D_._o_r_g Liam J. Foy _l_i_a_m_j_f_o_y_@_N_e_t_B_S_D_._o_r_g John Heasley _h_e_a_s_@_N_e_t_B_S_D_._o_r_g Geert Hendrickx _g_h_e_n_@_N_e_t_B_S_D_._o_r_g Soren Jacobsen _s_n_j_@_N_e_t_B_S_D_._o_r_g Daniel de Kok _d_a_n_i_e_l_@_N_e_t_B_S_D_._o_r_g Phil Nelson _p_h_i_l_@_N_e_t_B_S_D_._o_r_g Jeff Rizzo _r_i_z_@_N_e_t_B_S_D_._o_r_g _N_e_t_B_S_D _D_e_v_e_l_o_p_e_r_s_: Nathan Ahlstrom _n_r_a_@_N_e_t_B_S_D_._o_r_g Steve Allen _w_o_r_m_e_y_@_N_e_t_B_S_D_._o_r_g Jukka Andberg _j_a_n_d_b_e_r_g_@_N_e_t_B_S_D_._o_r_g Julian Assange _p_r_o_f_f_@_N_e_t_B_S_D_._o_r_g Lennart Augustsson _a_u_g_u_s_t_s_s_@_N_e_t_B_S_D_._o_r_g Christoph Badura _b_a_d_@_N_e_t_B_S_D_._o_r_g Bang Jun-Young _j_u_n_y_o_u_n_g_@_N_e_t_B_S_D_._o_r_g Dieter Baron _d_i_l_l_o_@_N_e_t_B_S_D_._o_r_g Robert V. Baron _r_v_b_@_N_e_t_B_S_D_._o_r_g Alan Barrett _a_p_b_@_N_e_t_B_S_D_._o_r_g Grant Beattie _g_r_a_n_t_@_N_e_t_B_S_D_._o_r_g Jason Beegan _j_t_b_@_N_e_t_B_S_D_._o_r_g Erik Berls _c_y_b_e_r_@_N_e_t_B_S_D_._o_r_g Hiroyuki Bessho _b_s_h_@_N_e_t_B_S_D_._o_r_g John Birrell _j_b_@_N_e_t_B_S_D_._o_r_g Mason Loring Bliss _m_a_s_o_n_@_N_e_t_B_S_D_._o_r_g Charles Blundell _c_b_@_N_e_t_B_S_D_._o_r_g Rafal Boni _r_a_f_a_l_@_N_e_t_B_S_D_._o_r_g Stephen Borrill _s_b_o_r_r_i_l_l_@_N_e_t_B_S_D_._o_r_g Sean Boudreau _s_e_a_n_b_@_N_e_t_B_S_D_._o_r_g Manuel Bouyer _b_o_u_y_e_r_@_N_e_t_B_S_D_._o_r_g John Brezak _b_r_e_z_a_k_@_N_e_t_B_S_D_._o_r_g Allen Briggs _b_r_i_g_g_s_@_N_e_t_B_S_D_._o_r_g Mark Brinicombe _m_a_r_k_@_N_e_t_B_S_D_._o_r_g Aaron Brown _a_b_r_o_w_n_@_N_e_t_B_S_D_._o_r_g Andrew Brown _a_t_a_t_a_t_@_N_e_t_B_S_D_._o_r_g David Brownlee _a_b_s_@_N_e_t_B_S_D_._o_r_g Frederick Bruckman _f_r_e_d_b_@_N_e_t_B_S_D_._o_r_g Jon Buller _j_o_n_b_@_N_e_t_B_S_D_._o_r_g Simon Burge _s_i_m_o_n_b_@_N_e_t_B_S_D_._o_r_g Robert Byrnes _b_y_r_n_e_s_@_N_e_t_B_S_D_._o_r_g Pavel Cahyna _p_a_v_e_l_@_N_e_t_B_S_D_._o_r_g D'Arcy J.M. Cain _d_a_r_c_y_@_N_e_t_B_S_D_._o_r_g Daniel Carosone _d_a_n_@_N_e_t_B_S_D_._o_r_g Dave Carrel _c_a_r_r_e_l_@_N_e_t_B_S_D_._o_r_g James Chacon _j_m_c_@_N_e_t_B_S_D_._o_r_g Mihai Chelaru _k_e_f_r_e_n_@_N_e_t_B_S_D_._o_r_g Bill Coldwell _b_i_l_l_c_@_N_e_t_B_S_D_._o_r_g Julian Coleman _j_d_c_@_N_e_t_B_S_D_._o_r_g Ben Collver _b_e_n_@_N_e_t_B_S_D_._o_r_g Marcus Comstedt _m_a_r_c_u_s_@_N_e_t_B_S_D_._o_r_g Jeremy Cooper _j_e_r_e_m_y_@_N_e_t_B_S_D_._o_r_g Chuck Cranor _c_h_u_c_k_@_N_e_t_B_S_D_._o_r_g Alistair Crooks _a_g_c_@_N_e_t_B_S_D_._o_r_g Aidan Cully _a_i_d_a_n_@_N_e_t_B_S_D_._o_r_g Garrett D'Amore _g_d_a_m_o_r_e_@_N_e_t_B_S_D_._o_r_g Johan Danielsson _j_o_d_a_@_N_e_t_B_S_D_._o_r_g John Darrow _j_d_a_r_r_o_w_@_N_e_t_B_S_D_._o_r_g Jed Davis _j_l_d_@_N_e_t_B_S_D_._o_r_g Matt DeBergalis _d_e_b_e_r_g_@_N_e_t_B_S_D_._o_r_g Arnaud Degroote _d_e_g_r_o_o_t_e_@_N_e_t_B_S_D_._o_r_g Rob Deker _d_e_k_e_r_@_N_e_t_B_S_D_._o_r_g Chris G. Demetriou _c_g_d_@_N_e_t_B_S_D_._o_r_g Tracy Di Marco White _g_e_n_d_a_l_i_a_@_N_e_t_B_S_D_._o_r_g Jarom'ir Dolecek _j_d_o_l_e_c_e_k_@_N_e_t_B_S_D_._o_r_g Andy Doran _a_d_@_N_e_t_B_S_D_._o_r_g Roland Dowdeswell _e_l_r_i_c_@_N_e_t_B_S_D_._o_r_g Emmanuel Dreyfus _m_a_n_u_@_N_e_t_B_S_D_._o_r_g Matthias Drochner _d_r_o_c_h_n_e_r_@_N_e_t_B_S_D_._o_r_g Jun Ebihara _j_u_n_@_N_e_t_B_S_D_._o_r_g Hoavard Eidnes _h_e_@_N_e_t_B_S_D_._o_r_g Jaime A Fournier _o_b_e_r_@_N_e_t_B_S_D_._o_r_g Stoned Elipot _s_e_b_@_N_e_t_B_S_D_._o_r_g Michael van Elst _m_l_e_l_s_t_v_@_N_e_t_B_S_D_._o_r_g Enami Tsugutomo _e_n_a_m_i_@_N_e_t_B_S_D_._o_r_g Bernd Ernesti _v_e_e_g_o_@_N_e_t_B_S_D_._o_r_g Erik Fair _f_a_i_r_@_N_e_t_B_S_D_._o_r_g Gavan Fantom _g_a_v_a_n_@_N_e_t_B_S_D_._o_r_g Hauke Fath _h_a_u_k_e_@_N_e_t_B_S_D_._o_r_g Hubert Feyrer _h_u_b_e_r_t_f_@_N_e_t_B_S_D_._o_r_g Jason R. Fink _j_r_f_@_N_e_t_B_S_D_._o_r_g Matt J. Fleming _m_j_f_@_N_e_t_B_S_D_._o_r_g Marty Fouts _m_a_r_t_y_@_N_e_t_B_S_D_._o_r_g Liam J. Foy _l_i_a_m_j_f_o_y_@_N_e_t_B_S_D_._o_r_g Matt Fredette _f_r_e_d_e_t_t_e_@_N_e_t_B_S_D_._o_r_g Thorsten Frueauf _f_r_u_e_a_u_f_@_N_e_t_B_S_D_._o_r_g Castor Fu _c_a_s_t_o_r_@_N_e_t_B_S_D_._o_r_g Ichiro Fukuhara _i_c_h_i_r_o_@_N_e_t_B_S_D_._o_r_g Quentin Garnier _c_u_b_e_@_N_e_t_B_S_D_._o_r_g Thomas Gerner _t_h_o_m_a_s_@_N_e_t_B_S_D_._o_r_g Simon J. Gerraty _s_j_g_@_N_e_t_B_S_D_._o_r_g Justin Gibbs _g_i_b_b_s_@_N_e_t_B_S_D_._o_r_g Chris Gilbert _c_h_r_i_s_@_N_e_t_B_S_D_._o_r_g Eric Gillespie _e_p_g_@_N_e_t_B_S_D_._o_r_g Brian Ginsbach _g_i_n_s_b_a_c_h_@_N_e_t_B_S_D_._o_r_g Paul Goyette _p_g_o_y_e_t_t_e_@_N_e_t_B_S_D_._o_r_g Michael Graff _e_x_p_l_o_r_e_r_@_N_e_t_B_S_D_._o_r_g Brian C. Grayson _b_g_r_a_y_s_o_n_@_N_e_t_B_S_D_._o_r_g Matthew Green _m_r_g_@_N_e_t_B_S_D_._o_r_g Andreas Gustafsson _g_s_o_n_@_N_e_t_B_S_D_._o_r_g Ulrich Habel _r_h_a_e_n_@_N_e_t_B_S_D_._o_r_g Jun-ichiro itojun Hagino _i_t_o_j_u_n_@_N_e_t_B_S_D_._o_r_g HAMAJIMA Katsuomi _h_a_m_a_j_i_m_a_@_N_e_t_B_S_D_._o_r_g Adam Hamsik _h_a_a_d_@_N_e_t_B_S_D_._o_r_g Juergen Hannken-Illjes _h_a_n_n_k_e_n_@_N_e_t_B_S_D_._o_r_g Charles M. Hannum _m_y_c_r_o_f_t_@_N_e_t_B_S_D_._o_r_g Ben Harris _b_j_h_2_1_@_N_e_t_B_S_D_._o_r_g Ross Harvey _r_o_s_s_@_N_e_t_B_S_D_._o_r_g Eric Haszlakiewicz _e_r_h_@_N_e_t_B_S_D_._o_r_g John Hawkinson _j_h_a_w_k_@_N_e_t_B_S_D_._o_r_g HAYAKAWA Koichi _h_a_y_a_@_N_e_t_B_S_D_._o_r_g John Heasley _h_e_a_s_@_N_e_t_B_S_D_._o_r_g Geert Hendrickx _g_h_e_n_@_N_e_t_B_S_D_._o_r_g Ren'e Hexel _r_h_@_N_e_t_B_S_D_._o_r_g Iain Hibbert _p_l_u_n_k_y_@_N_e_t_B_S_D_._o_r_g Kouichirou Hiratsuka _h_i_r_a_@_N_e_t_B_S_D_._o_r_g Michael L. Hitch _m_h_i_t_c_h_@_N_e_t_B_S_D_._o_r_g 'Ad'am H'oka _a_h_o_k_a_@_N_e_t_B_S_D_._o_r_g Jachym Holecek _f_r_e_z_a_@_N_e_t_B_S_D_._o_r_g David A. Holland _d_h_o_l_l_a_n_d_@_N_e_t_B_S_D_._o_r_g Christian E. Hopps _c_h_o_p_p_s_@_N_e_t_B_S_D_._o_r_g Ken Hornstein _k_e_n_h_@_N_e_t_B_S_D_._o_r_g Marc Horowitz _m_a_r_c_@_N_e_t_B_S_D_._o_r_g Eduardo Horvath _e_e_h_@_N_e_t_B_S_D_._o_r_g Nick Hudson _s_k_r_l_l_@_N_e_t_B_S_D_._o_r_g Shell Hung _s_h_e_l_l_@_N_e_t_B_S_D_._o_r_g Martin Husemann _m_a_r_t_i_n_@_N_e_t_B_S_D_._o_r_g Dean Huxley _d_e_a_n_@_N_e_t_B_S_D_._o_r_g Love H"ornquist oAstrand _l_h_a_@_N_e_t_B_S_D_._o_r_g Roland Illig _r_i_l_l_i_g_@_N_e_t_B_S_D_._o_r_g Bernardo Innocenti _b_e_r_n_i_e_@_N_e_t_B_S_D_._o_r_g Tetsuya Isaki _i_s_a_k_i_@_N_e_t_B_S_D_._o_r_g ITOH Yasufumi _i_t_o_h_y_@_N_e_t_B_S_D_._o_r_g IWAMOTO Toshihiro _t_o_s_h_i_i_@_N_e_t_B_S_D_._o_r_g Matthew Jacob _m_j_a_c_o_b_@_N_e_t_B_S_D_._o_r_g Soren Jacobsen _s_n_j_@_N_e_t_B_S_D_._o_r_g Lonhyn T. Jasinskyj _l_o_n_h_y_n_@_N_e_t_B_S_D_._o_r_g Darrin Jewell _d_b_j_@_N_e_t_B_S_D_._o_r_g Nicolas Joly _n_j_o_l_y_@_N_e_t_B_S_D_._o_r_g Chris Jones _c_j_o_n_e_s_@_N_e_t_B_S_D_._o_r_g S/oren J/orvang _s_o_r_e_n_@_N_e_t_B_S_D_._o_r_g Takahiro Kambe _t_a_c_a_@_N_e_t_B_S_D_._o_r_g Masanori Kanaoka _k_a_n_a_o_k_a_@_N_e_t_B_S_D_._o_r_g Antti Kantee _p_o_o_k_a_@_N_e_t_B_S_D_._o_r_g Frank Kardel _k_a_r_d_e_l_@_N_e_t_B_S_D_._o_r_g Mattias Karlsson _k_e_i_h_a_n_@_N_e_t_B_S_D_._o_r_g KAWAMOTO Yosihisa _k_a_w_a_m_o_t_o_@_N_e_t_B_S_D_._o_r_g Mario Kemper _m_a_g_i_c_k_@_N_e_t_B_S_D_._o_r_g Min Sik Kim _m_i_n_s_k_i_m_@_N_e_t_B_S_D_._o_r_g Thomas Klausner _w_i_z_@_N_e_t_B_S_D_._o_r_g Klaus Klein _k_l_e_i_n_k_@_N_e_t_B_S_D_._o_r_g John Klos _j_k_l_o_s_@_N_e_t_B_S_D_._o_r_g Wayne Knowles _w_d_k_@_N_e_t_B_S_D_._o_r_g Takayoshi Kochi _k_o_c_h_i_@_N_e_t_B_S_D_._o_r_g John Kohl _j_t_k_@_N_e_t_B_S_D_._o_r_g Daniel de Kok _d_a_n_i_e_l_@_N_e_t_B_S_D_._o_r_g Jonathan A. Kollasch _j_a_k_l_l_s_c_h_@_N_e_t_B_S_D_._o_r_g Paul Kranenburg _p_k_@_N_e_t_B_S_D_._o_r_g Lubomir Kundrak _l_k_u_n_d_r_a_k_@_N_e_t_B_S_D_._o_r_g Jochen Kunz _j_k_u_n_z_@_N_e_t_B_S_D_._o_r_g Martti Kuparinen _m_a_r_t_t_i_@_N_e_t_B_S_D_._o_r_g Kentaro A. Kurahone _k_u_r_a_h_o_n_e_@_N_e_t_B_S_D_._o_r_g Arnaud Lacombe _a_l_c_@_N_e_t_B_S_D_._o_r_g Kevin Lahey _k_m_l_@_N_e_t_B_S_D_._o_r_g David Laight _d_s_l_@_N_e_t_B_S_D_._o_r_g Johnny C. Lam _j_l_a_m_@_N_e_t_B_S_D_._o_r_g Martin J. Laubach _m_j_l_@_N_e_t_B_S_D_._o_r_g Greg Lehey _g_r_o_g_@_N_e_t_B_S_D_._o_r_g Ted Lemon _m_e_l_l_o_n_@_N_e_t_B_S_D_._o_r_g Christian Limpach _c_l_@_N_e_t_B_S_D_._o_r_g Frank van der Linden _f_v_d_l_@_N_e_t_B_S_D_._o_r_g Joel Lindholm _j_o_e_l_@_N_e_t_B_S_D_._o_r_g Tonnerre Lombard _t_o_n_n_e_r_r_e_@_N_e_t_B_S_D_._o_r_g Mike Long _m_i_k_e_l_@_N_e_t_B_S_D_._o_r_g Michael Lorenz _m_a_c_a_l_l_a_n_@_N_e_t_B_S_D_._o_r_g Warner Losh _i_m_p_@_N_e_t_B_S_D_._o_r_g Tomasz Luchowski _z_u_n_t_u_m_@_N_e_t_B_S_D_._o_r_g Federico Lupi _f_e_d_e_r_i_c_o_@_N_e_t_B_S_D_._o_r_g Brett Lymn _b_l_y_m_n_@_N_e_t_B_S_D_._o_r_g Paul Mackerras _p_a_u_l_u_s_@_N_e_t_B_S_D_._o_r_g MAEKAWA Masahide _g_e_h_e_n_n_a_@_N_e_t_B_S_D_._o_r_g Anders Magnusson _r_a_g_g_e_@_N_e_t_B_S_D_._o_r_g Cherry G. Mathew _c_h_e_r_r_y_@_N_e_t_B_S_D_._o_r_g David Maxwell _d_a_v_i_d_@_N_e_t_B_S_D_._o_r_g Gregory McGarry _g_m_c_g_a_r_r_y_@_N_e_t_B_S_D_._o_r_g Dan McMahill _d_m_c_m_a_h_i_l_l_@_N_e_t_B_S_D_._o_r_g Jared D. McNeill _j_m_c_n_e_i_l_l_@_N_e_t_B_S_D_._o_r_g Neil J. McRae _n_e_i_l_@_N_e_t_B_S_D_._o_r_g Julio M. Merino Vidal _j_m_m_v_@_N_e_t_B_S_D_._o_r_g Perry Metzger _p_e_r_r_y_@_N_e_t_B_S_D_._o_r_g Luke Mewburn _l_u_k_e_m_@_N_e_t_B_S_D_._o_r_g Brook Milligan _b_r_o_o_k_@_N_e_t_B_S_D_._o_r_g Minoura Makoto _m_i_n_o_u_r_a_@_N_e_t_B_S_D_._o_r_g Simas Mockevicius _s_y_m_k_a_@_N_e_t_B_S_D_._o_r_g der Mouse _m_o_u_s_e_@_N_e_t_B_S_D_._o_r_g Joseph Myers _j_s_m_@_N_e_t_B_S_D_._o_r_g Ken Nakata _k_e_n_n_@_N_e_t_B_S_D_._o_r_g Takeshi Nakayama _n_a_k_a_y_a_m_a_@_N_e_t_B_S_D_._o_r_g Phil Nelson _p_h_i_l_@_N_e_t_B_S_D_._o_r_g John Nemeth _j_n_e_m_e_t_h_@_N_e_t_B_S_D_._o_r_g Bob Nestor _r_n_e_s_t_o_r_@_N_e_t_B_S_D_._o_r_g NISHIMURA Takeshi _n_s_m_r_t_k_s_@_N_e_t_B_S_D_._o_r_g Tohru Nishimura _n_i_s_i_m_u_r_a_@_N_e_t_B_S_D_._o_r_g NONAKA Kimihiro _n_o_n_a_k_a_@_N_e_t_B_S_D_._o_r_g Takehiko NOZAKI _t_n_o_z_a_k_i_@_N_e_t_B_S_D_._o_r_g Tobias Nygren _t_n_n_@_N_e_t_B_S_D_._o_r_g OBATA Akio _o_b_a_c_h_e_@_N_e_t_B_S_D_._o_r_g Jesse Off _j_o_f_f_@_N_e_t_B_S_D_._o_r_g Tatoku Ogaito _t_a_c_h_a_@_N_e_t_B_S_D_._o_r_g OKANO Takayoshi _k_a_n_o_@_N_e_t_B_S_D_._o_r_g Masaru Oki _o_k_i_@_N_e_t_B_S_D_._o_r_g Atsushi Onoe _o_n_o_e_@_N_e_t_B_S_D_._o_r_g Greg Oster _o_s_t_e_r_@_N_e_t_B_S_D_._o_r_g Rui Paulo _r_p_a_u_l_o_@_N_e_t_B_S_D_._o_r_g Jonathan Perkin _s_k_e_t_c_h_@_N_e_t_B_S_D_._o_r_g Andrey Petrov _p_e_t_r_o_v_@_N_e_t_B_S_D_._o_r_g Herb Peyerl _h_p_e_y_e_r_l_@_N_e_t_B_S_D_._o_r_g Matthias Pfaller _m_a_t_t_h_i_a_s_@_N_e_t_B_S_D_._o_r_g Chris Pinnock _c_j_e_p_@_N_e_t_B_S_D_._o_r_g Adrian Portelli _a_d_r_i_a_n_p_@_N_e_t_B_S_D_._o_r_g Peter Postma _p_e_t_e_r_@_N_e_t_B_S_D_._o_r_g Dante Profeta _d_a_n_t_e_@_N_e_t_B_S_D_._o_r_g Chris Provenzano _p_r_o_v_e_n_@_N_e_t_B_S_D_._o_r_g Niels Provos _p_r_o_v_o_s_@_N_e_t_B_S_D_._o_r_g Mindaugas Rasiukevicius _r_m_i_n_d_@_N_e_t_B_S_D_._o_r_g Michael Rauch _m_r_a_u_c_h_@_N_e_t_B_S_D_._o_r_g Marc Recht _r_e_c_h_t_@_N_e_t_B_S_D_._o_r_g Darren Reed _d_a_r_r_e_n_r_@_N_e_t_B_S_D_._o_r_g Jeremy C. Reed _r_e_e_d_@_N_e_t_B_S_D_._o_r_g Antoine Reilles _t_o_n_i_o_@_N_e_t_B_S_D_._o_r_g Tyler R. Retzlaff _r_t_r_@_N_e_t_B_S_D_._o_r_g Scott Reynolds _s_c_o_t_t_r_@_N_e_t_B_S_D_._o_r_g Michael Richardson _m_c_r_@_N_e_t_B_S_D_._o_r_g Tim Rightnour _g_a_r_b_l_e_d_@_N_e_t_B_S_D_._o_r_g Alan Ritter _r_i_t_t_e_r_a_@_N_e_t_B_S_D_._o_r_g Jeff Rizzo _r_i_z_@_N_e_t_B_S_D_._o_r_g Hans Rosenfeld _h_a_n_s_@_N_e_t_B_S_D_._o_r_g Gordon Ross _g_w_r_@_N_e_t_B_S_D_._o_r_g Steve Rumble _r_u_m_b_l_e_@_N_e_t_B_S_D_._o_r_g Ilpo Ruotsalainen _l_o_n_e_w_o_l_f_@_N_e_t_B_S_D_._o_r_g Heiko W. Rupp _h_w_r_@_N_e_t_B_S_D_._o_r_g Blair J. Sadewitz _b_j_s_@_N_e_t_B_S_D_._o_r_g David Sainty _d_s_a_i_n_t_y_@_N_e_t_B_S_D_._o_r_g SAITOH Masanobu _m_s_a_i_t_o_h_@_N_e_t_B_S_D_._o_r_g Kazuki Sakamoto _s_a_k_a_m_o_t_o_@_N_e_t_B_S_D_._o_r_g Curt Sampson _c_j_s_@_N_e_t_B_S_D_._o_r_g Wilfredo Sanchez _w_s_a_n_c_h_e_z_@_N_e_t_B_S_D_._o_r_g Ty Sarna _t_s_a_r_n_a_@_N_e_t_B_S_D_._o_r_g SATO Kazumi _s_a_t_o_@_N_e_t_B_S_D_._o_r_g Jan Schaumann _j_s_c_h_a_u_m_a_@_N_e_t_B_S_D_._o_r_g Matthias Scheler _t_r_o_n_@_N_e_t_B_S_D_._o_r_g Silke Scheler _s_i_l_k_e_@_N_e_t_B_S_D_._o_r_g Karl Schilke (rAT) _r_a_t_@_N_e_t_B_S_D_._o_r_g Amitai Schlair _s_c_h_m_o_n_z_@_N_e_t_B_S_D_._o_r_g Konrad Schroder _p_e_r_s_e_a_n_t_@_N_e_t_B_S_D_._o_r_g Georg Schwarz _s_c_h_w_a_r_z_@_N_e_t_B_S_D_._o_r_g Lubomir Sedlacik _s_a_l_o_@_N_e_t_B_S_D_._o_r_g Christopher SEKIYA _s_e_k_i_y_a_@_N_e_t_B_S_D_._o_r_g Reed Shadgett _d_e_n_t_@_N_e_t_B_S_D_._o_r_g John Shannon _s_h_a_n_n_o_n_j_r_@_N_e_t_B_S_D_._o_r_g Tim Shepard _s_h_e_p_@_N_e_t_B_S_D_._o_r_g Takeshi Shibagaki _s_h_i_b_a_@_N_e_t_B_S_D_._o_r_g Naoto Shimazaki _i_g_y_@_N_e_t_B_S_D_._o_r_g Takao Shinohara _s_h_i_n_@_N_e_t_B_S_D_._o_r_g Takuya SHIOZAKI _t_s_h_i_o_z_a_k_@_N_e_t_B_S_D_._o_r_g Daniel Sieger _d_s_i_e_g_e_r_@_N_e_t_B_S_D_._o_r_g Chuck Silvers _c_h_s_@_N_e_t_B_S_D_._o_r_g Thor Lancelot Simon _t_l_s_@_N_e_t_B_S_D_._o_r_g Jeff Smith _j_e_f_f_s_@_N_e_t_B_S_D_._o_r_g Noriyuki Soda _s_o_d_a_@_N_e_t_B_S_D_._o_r_g Wolfgang Solfrank _w_s_@_N_e_t_B_S_D_._o_r_g SOMEYA Yoshihiko _s_o_m_e_y_a_@_N_e_t_B_S_D_._o_r_g Bill Sommerfeld _s_o_m_m_e_r_f_e_l_d_@_N_e_t_B_S_D_._o_r_g J"org Sonnenberger _j_o_e_r_g_@_N_e_t_B_S_D_._o_r_g Ignatios Souvatzis _i_s_@_N_e_t_B_S_D_._o_r_g T K Spindler _d_o_g_c_o_w_@_N_e_t_B_S_D_._o_r_g Bill Squier _g_r_o_o_@_N_e_t_B_S_D_._o_r_g Jonathan Stone _j_o_n_a_t_h_a_n_@_N_e_t_B_S_D_._o_r_g Bill Studenmund _w_r_s_t_u_d_e_n_@_N_e_t_B_S_D_._o_r_g Kevin Sullivan _s_u_l_l_i_v_a_n_@_N_e_t_B_S_D_._o_r_g SUNAGAWA Keiki _k_e_i_@_N_e_t_B_S_D_._o_r_g Kimmo Suominen _k_i_m_@_N_e_t_B_S_D_._o_r_g Robert Swindells _r_j_s_@_N_e_t_B_S_D_._o_r_g Shin Takemura _t_a_k_e_m_u_r_a_@_N_e_t_B_S_D_._o_r_g TAMURA Kent _k_e_n_t_@_N_e_t_B_S_D_._o_r_g Shin'ichiro TAYA _t_a_y_a_@_N_e_t_B_S_D_._o_r_g Ian Lance Taylor _i_a_n_@_N_e_t_B_S_D_._o_r_g Matt Thomas _m_a_t_t_@_N_e_t_B_S_D_._o_r_g Jason Thorpe _t_h_o_r_p_e_j_@_N_e_t_B_S_D_._o_r_g Christoph Toshok _t_o_s_h_o_k_@_N_e_t_B_S_D_._o_r_g Greg Troxel _g_d_t_@_N_e_t_B_S_D_._o_r_g Tsubai Masanari _t_s_u_b_a_i_@_N_e_t_B_S_D_._o_r_g Izumi Tsutsui _t_s_u_t_s_u_i_@_N_e_t_B_S_D_._o_r_g UCHIYAMA Yasushi _u_c_h_@_N_e_t_B_S_D_._o_r_g Masao Uebayashi _u_e_b_a_y_a_s_i_@_N_e_t_B_S_D_._o_r_g Shuichiro URATA _u_r_@_N_e_t_B_S_D_._o_r_g Valeriy E. Ushakov _u_w_e_@_N_e_t_B_S_D_._o_r_g Todd Vierling _t_v_@_N_e_t_B_S_D_._o_r_g Aymeric Vincent _a_y_m_e_r_i_c_@_N_e_t_B_S_D_._o_r_g Paul Vixie _v_i_x_i_e_@_N_e_t_B_S_D_._o_r_g Mike M. Volokhov _m_i_s_h_k_a_@_N_e_t_B_S_D_._o_r_g Krister Walfridsson _k_r_i_s_t_e_r_w_@_N_e_t_B_S_D_._o_r_g Lex Wennmacher _w_e_n_n_m_a_c_h_@_N_e_t_B_S_D_._o_r_g Leo Weppelman _l_e_o_@_N_e_t_B_S_D_._o_r_g Assar Westerlund _a_s_s_a_r_@_N_e_t_B_S_D_._o_r_g Todd Whitesel _t_o_d_d_p_w_@_N_e_t_B_S_D_._o_r_g Frank Wille _p_h_x_@_N_e_t_B_S_D_._o_r_g Nathan Williams _n_a_t_h_a_n_w_@_N_e_t_B_S_D_._o_r_g Rob Windsor _w_i_n_d_s_o_r_@_N_e_t_B_S_D_._o_r_g Dan Winship _d_a_n_w_@_N_e_t_B_S_D_._o_r_g Jim Wise _j_w_i_s_e_@_N_e_t_B_S_D_._o_r_g Michael Wolfson _m_b_w_@_N_e_t_B_S_D_._o_r_g Colin Wood _e_n_d_e_r_@_N_e_t_B_S_D_._o_r_g Steve Woodford _s_c_w_@_N_e_t_B_S_D_._o_r_g YAMAMOTO Takashi _y_a_m_t_@_N_e_t_B_S_D_._o_r_g Yuji Yamano _y_y_a_m_a_n_o_@_N_e_t_B_S_D_._o_r_g David Young _d_y_o_u_n_g_@_N_e_t_B_S_D_._o_r_g Reinoud Zandijk _r_e_i_n_o_u_d_@_N_e_t_B_S_D_._o_r_g S.P.Zeidler _s_p_z_@_N_e_t_B_S_D_._o_r_g Maria Zevenhoven _m_a_r_i_a_7_@_N_e_t_B_S_D_._o_r_g Christos Zoulas _c_h_r_i_s_t_o_s_@_N_e_t_B_S_D_._o_r_g _O_t_h_e_r _c_o_n_t_r_i_b_u_t_o_r_s_: Dave Burgess _b_u_r_g_e_s_s_@_c_y_n_j_u_t_._i_n_f_o_n_e_t_._n_e_t Brian R. Gaeke _b_r_g_@_d_g_a_t_e_._o_r_g Brad Grantham _g_r_a_n_t_h_a_m_@_t_e_n_o_n_._c_o_m Lawrence Kesteloot _k_e_s_t_e_l_o_o_@_c_s_._u_n_c_._e_d_u Waldi Ravens _w_a_l_d_i_@_m_o_a_c_s_._i_n_d_i_v_._n_l_._n_e_t LLeeggaall MMuummbboo--JJuummbboo All product names mentioned herein are trademarks or registered trade- marks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: NetBSD is a registered trademark of The NetBSD Foundation, Inc. This product includes software developed by the University of California, Berkeley and its contributors. This product includes software developed by the NetBSD Foundation. This product includes software developed by The NetBSD Foundation, Inc. and its contributors. This product includes software developed for the NetBSD Project. See http://www.netbsd.org/ for information about NetBSD. This product contains software developed by Ignatios Souvatzis for the NetBSD project. This product contains software written by Ignatios Souvatzis and Michael L. Hitch for the NetBSD project. This product contains software written by Michael L. Hitch for the NetBSD project. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) This product includes cryptographic software written by Eric Young (eay@mincom.oz.au) This product includes software designed by William Allen Simpson. This product includes software developed at Ludd, University of Lulea, Sweden and its contributors. This product includes software developed at Ludd, University of Lulea. This product includes software developed at the Information Technology Division, US Naval Research Laboratory. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by David Jones and Gordon Ross This product includes software developed by Gordon W. Ross and Leo Wep- pelman. This product includes software developed by Hellmuth Michaelis and Joerg Wunsch This product includes software developed by Internet Research Institute, Inc. This product includes software developed by Leo Weppelman and Waldi Ravens. This product includes software developed by Mika Kortelainen This product includes software developed by Aaron Brown and Harvard Uni- versity. This product includes software developed by Adam Ciarcinski for the NetBSD project. This product includes software developed by Adam Glass and Charles M. Hannum. This product includes software developed by Adam Glass. This product includes software developed by Advanced Risc Machines Ltd. This product includes software developed by Alex Zepeda, and Colin Wood for the NetBSD Projet. This product includes software developed by Alex Zepeda. This product includes software developed by Alistair G. Crooks. This product includes software developed by Alistair G. Crooks. for the NetBSD project. This product includes software developed by Allen Briggs This product includes software developed by Amancio Hasty and Roger Hardiman This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Berkeley Software Design, Inc. This product includes software developed by Bill Paul. This product includes software developed by Bodo Moeller. (If available, substitute umlauted o for oe) This product includes software developed by Boris Popov. This product includes software developed by Brad Pepers This product includes software developed by Bradley A. Grantham. This product includes software developed by Brini. This product includes software developed by Causality Limited. This product includes software developed by Charles D. Cranor and Seth Widoff. This product includes software developed by Charles D. Cranor and Wash- ington University. This product includes software developed by Charles D. Cranor, Washington University, and the University of California, Berkeley and its contribu- tors. This product includes software developed by Charles D. Cranor, Washington University, the University of California, Berkeley and its contributors. This product includes software developed by Charles D. Cranor. This product includes software developed by Charles Hannum. This product includes software developed by Charles M. Hannum, by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Laboratory, and its contributors. This product includes software developed by Charles M. Hannum. This product includes software developed by Christian E. Hopps, Ezra Story, Kari Mettinen, Markus Wild, Lutz Vieweg and Michael Teske. This product includes software developed by Christian E. Hopps. This product includes software developed by Christian Limpach This product includes software developed by Christopher G. Demetriou for the NetBSD Project. This product includes software developed by Christopher G. Demetriou. This product includes software developed by Christos Zoulas. This product includes software developed by Chuck Silvers. This product includes software developed by Colin Wood for the NetBSD Project. This product includes software developed by Colin Wood. This product includes software developed by Cybernet Corporation and Nan Yang Computer Services Limited This product includes software developed by Daishi Kato This product includes software developed by Dale Rahn. This product includes software developed by Daniel Widenfalk and Michael L. Hitch. This product includes software developed by Daniel Widenfalk for the NetBSD Project. This product includes software developed by Darrin B. Jewell This product includes software developed by David Miller. This product includes software developed by Dean Huxley. This product includes software developed by Eduardo Horvath. This product includes software developed by Eric S. Hvozda. This product includes software developed by Eric S. Raymond This product includes software developed by Eric Young (eay@@min- com.oz.au) This product includes software developed by Eric Young (eay@crypt- soft.com) This product includes software developed by Eric Young (eay@mincom.oz.au) This product includes software developed by Ezra Story and by Kari Met- tinen. This product includes software developed by Ezra Story, by Kari Mettinen and by Bernd Ernesti. This product includes software developed by Ezra Story, by Kari Mettinen, Michael Teske and by Bernd Ernesti. This product includes software developed by Ezra Story, by Kari Mettinen, and Michael Teske. This product includes software developed by Ezra Story. This product includes software developed by Frank van der Linden for the NetBSD Project. This product includes software developed by Gardner Buchanan. This product includes software developed by Gary Thomas. This product includes software developed by Gordon Ross This product includes software developed by Gordon W. Ross This product includes software developed by HAYAKAWA Koichi. This product includes software developed by Harvard University and its contributors. This product includes software developed by Harvard University. This product includes software developed by Herb Peyerl. This product includes software developed by Hubert Feyrer for the NetBSD Project. This product includes software developed by Iain Hibbert This product includes software developed by Ian F. Darwin and others. This product includes software developed by Ian W. Dall. This product includes software developed by Ichiro FUKUHARA. This product includes software developed by Ignatios Souvatzis for the NetBSD Project. This product includes software developed by Internet Initiative Japan Inc. This product includes software developed by James R. Maynard III. This product includes software developed by Jared D. McNeill. This product includes software developed by Jason L. Wright This product includes software developed by Jason R. Thorpe for And Com- munications, http://www.and.com/ This product includes software developed by Joachim Koenig-Baltes. This product includes software developed by Jochen Pohl for The NetBSD Project. This product includes software developed by Joerg Wunsch This product includes software developed by John Birrell. This product includes software developed by John P. Wittkoski. This product includes software developed by John Polstra. This product includes software developed by Jonathan R. Stone for the NetBSD Project. This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. This product includes software developed by Jonathan Stone. This product includes software developed by Juan Romero Pardines for the NetBSD Foundation, Inc. and its contributors. This product includes software developed by Jukka Marin. This product includes software developed by Julian Highfield. This product includes software developed by Kazuhisa Shimizu. This product includes software developed by Kazuki Sakamoto. This product includes software developed by Kenneth Stailey. This product includes software developed by Kiyoshi Ikehara. This product includes software developed by Klaus Burkert,by Bernd Ernesti, by Michael van Elst, and by the University of California, Berke- ley and its contributors. This product includes software developed by LAN Media Corporation and its contributors. This product includes software developed by Leo Weppelman for the NetBSD Project. This product includes software developed by Leo Weppelman. This product includes software developed by Lloyd Parkes. This product includes software developed by Luke Mewburn. This product includes software developed by Lutz Vieweg. This product includes software developed by MINOURA Makoto, Takuya Harakawa. This product includes software developed by Manuel Bouyer. This product includes software developed by Marc Horowitz. This product includes software developed by Marcus Comstedt. This product includes software developed by Mark Brinicombe for the NetBSD project. This product includes software developed by Mark Brinicombe. This product includes software developed by Mark Murray This product includes software developed by Mark Tinguely and Jim Lowe This product includes software developed by Markus Wild. This product includes software developed by Martin Husemann and Wolfgang Solfrank. This product includes software developed by Masanobu Saitoh. This product includes software developed by Masaru Oki. This product includes software developed by Mats O Jansson and Charles D. Cranor. This product includes software developed by Mats O Jansson. This product includes software developed by Matt DeBergalis This product includes software developed by Matthew Fredette. This product includes software developed by Matthias Pfaller. This product includes software developed by Michael Graff for the NetBSD Project. This product includes software developed by Michael Graff. This product includes software developed by Michael L. Hitch. This product includes software developed by Michael Shalayeff. This product includes software developed by Michael Smith. This product includes software developed by Mike Glover and contributors. This product includes software developed by Mike Pritchard. This product includes software developed by Minoura Makoto. This product includes software developed by Nan Yang Computer Services Limited. This product includes software developed by Niels Provos. This product includes software developed by Niklas Hallqvist, Brandon Creighton and Job de Haas. This product includes software developed by Niklas Hallqvist. This product includes software developed by Onno van der Linden. This product includes software developed by Paul Kranenburg. This product includes software developed by Paul Mackerras. This product includes software developed by Per Fogelstrom This product includes software developed by Peter Galbavy. This product includes software developed by Phase One, Inc. This product includes software developed by Philip A. Nelson. This product includes software developed by Philip L. Budne. This product includes software developed by RiscBSD. This product includes software developed by Roar Thronaes. This product includes software developed by Rodney W. Grimes. This product includes software developed by Roger Hardiman This product includes software developed by Roland C. Dowdeswell. This product includes software developed by Rolf Grossmann. This product includes software developed by Ross Harvey for the NetBSD Project. This product includes software developed by Ross Harvey. This product includes software developed by Scott Bartram. This product includes software developed by Scott Stevens. This product includes software developed by Shingo WATANABE. This product includes software developed by Softweyr LLC, the University of California, Berkeley, and its contributors. This product includes software developed by Soren S. Jorvang. This product includes software developed by Stephan Thesing. This product includes software developed by Steve Woodford. This product includes software developed by Takashi Hamada This product includes software developed by Takumi Nakamura. This product includes software developed by Tatoku Ogaito for the NetBSD Project. This product includes software developed by Terrence R. Lambert. This product includes software developed by Tetsuya Isaki. This product includes software developed by Thomas Gerner This product includes software developed by Thomas Klausner for the NetBSD Project. This product includes software developed by Tobias Weingartner. This product includes software developed by Todd C. Miller. This product includes software developed by Tohru Nishimura and Reinoud Zandijk for the NetBSD Project. This product includes software developed by Tohru Nishimura for the NetBSD Project. This product includes software developed by Tohru Nishimura. for the NetBSD Project. This product includes software developed by TooLs GmbH. This product includes software developed by Toru Nishimura. This product includes software developed by Trimble Navigation, Ltd. This product includes software developed by WIDE Project and its contrib- utors. This product includes software developed by Waldi Ravens. This product includes software developed by Wasabi Systems for Zembu Labs, Inc. http://www.zembu.com/ This product includes software developed by Winning Strategies, Inc. This product includes software developed by Wolfgang Solfrank. This product includes software developed by Yasushi Yamasaki This product includes software developed by Zembu Labs, Inc. This product includes software developed by the Alice Group. This product includes software developed by the Center for Software Sci- ence at the University of Utah. This product includes software developed by the Charles D. Cranor, Wash- ington University, University of California, Berkeley and its contribu- tors. This product includes software developed by the Computer Systems Engi- neering Group at Lawrence Berkeley Laboratory. This product includes software developed by the David Muir Sharnoff. This product includes software developed by the Harvard University and its contributors. This product includes software developed by the Kungliga Tekniska H"ogskolan and its contributors. This product includes software developed by the Network Research Group at Lawrence Berkeley Laboratory. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/) This product includes software developed by the PocketBSD project and its contributors. This product includes software developed by the RiscBSD kernel team This product includes software developed by the RiscBSD team. This product includes software developed by the SMCC Technology Develop- ment Group at Sun Microsystems, Inc. This product includes software developed by the University of California, Berkeley and its contributors, as well as the Trustees of Columbia Uni- versity. This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. This product includes software developed by the University of California, Lawrence Berkeley Laboratory. This product includes software developed by the University of Illinois at Urbana and their contributors. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman. This product includes software developed by the University of Vermont and State Agricultural College and Garrett A. Wollman, by William F. Jolitz, and by the University of California, Berkeley, Lawrence Berkeley Labora- tory, and its contributors. This product includes software developed for the FreeBSD project This product includes software developed for the NetBSD Project by Bernd Ernesti. This product includes software developed for the NetBSD Project by Christopher G. Demetriou. This product includes software developed for the NetBSD Project by Chris- tos Zoulas This product includes software developed for the NetBSD Project by Emmanuel Dreyfus. This product includes software developed for the NetBSD Project by Frank van der Linden This product includes software developed for the NetBSD Project by Igna- tios Souvatzis. This product includes software developed for the NetBSD Project by Jason R. Thorpe. This product includes software developed for the NetBSD Project by John M. Vinopal. This product includes software developed for the NetBSD Project by Matthias Drochner. This product includes software developed for the NetBSD Project by Michael L. Hitch. This product includes software developed for the NetBSD Project by Perry E. Metzger. This product includes software developed for the NetBSD Project by Scott Bartram and Frank van der Linden This product includes software developed for the NetBSD Project by Alle- gro Networks, Inc., and Wasabi Systems, Inc. This product includes software developed for the NetBSD Project by Genetec Corporation. This product includes software developed for the NetBSD Project by Jonathan Stone. This product includes software developed for the NetBSD Project by Pier- mont Information Systems Inc. This product includes software developed for the NetBSD Project by SUNET, Swedish University Computer Network. This product includes software developed for the NetBSD Project by Shigeyuki Fukushima. This product includes software developed for the NetBSD Project by Wasabi Systems, Inc. This product includes software developed under OpenBSD by Per Fogelstrom Opsycon AB for RTMX Inc, North Carolina, USA. This product includes software developed under OpenBSD by Per Fogelstrom. This software is a component of "386BSD" developed by William F. Jolitz, TeleMuse. This software was developed by Holger Veit and Brian Moore for use with "386BSD" and similar operating systems. "Similar operating systems" includes mainly non-profit oriented systems for research and education, including but not restricted to "NetBSD", "FreeBSD", "Mach" (by CMU). This software includes software developed by the Computer Systems Labora- tory at the University of Utah. This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/computing/). This product includes software developed by Marshall M. Midden. This product includes software developed or owned by Caldera Interna- tional, Inc. The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase ``this text'' refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in NetBSD, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html. This notice shall appear on any product containing this material In the following statement, "This software" refers to the Mitsumi CD-ROM driver: This software was developed by Holger Veit and Brian Moore for use with "386BSD" and similar operating systems. "Similar operating systems" includes mainly non-profit oriented systems for research and education, including but not restricted to "NetBSD" , "FreeBSD" , "Mach" (by CMU). In the following statement, "This software" refers to the parallel port driver: This software is a component of "386BSD" developed by William F. Jolitz, TeleMuse. TThhee EEnndd NetBSD October 5, 2008 NetBSD